Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

G52 to W56?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

G52 to W56?

Post by SASS »

Evening all,
Im putting a 7mge into my lux and was thinking of rebuildin my G52 while im at it!! Question is that Im told the W56 is a stronger box, is it a bolt in swap for the G52 and will my transfer bolt straight up? or is it cheaper to just rebuild the G52 and keep the rightfoot under control.
Cheers SASS
Stick it in low and NAIL IT !!!!!!!!!!
Posts: 1208
Joined: Fri Nov 08, 2002 8:21 pm
Location: sunshine coast

Post by killalux »

also what vehicles are the W56 gearboxes found in.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS

LS1 STANDALONE HARNESS $475ex
Posts: 47
Joined: Thu Dec 23, 2004 10:15 pm
Location: St Kilda VIC

Post by cookiemonster »

W will bolt up, but don't know about transfer case. 2.7 porado uses W box. W stronger than G, R stronger than W. Luxes come with R series gearboxes in the diesel modles. Better choice for strength and bolt up ability. Go on Toyo mods web site for more info.
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

R are different bolt pattern to the W and G arent they?
needs to bolt to a W58 bellhousing.
Will The transfer from a G52 Bolt to a W56?
Will a W56 bolt to G52 gearbox mounts?
Cheers sass
Hey killa lux how do you find the 7mge?
Stick it in low and NAIL IT !!!!!!!!!!
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

Anyone?
Stick it in low and NAIL IT !!!!!!!!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests