Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RADIATORS

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

RADIATORS

Post by bigpig »

IS THERE ANYONE OUT THERE THAT CAN SUPPLY MR INFO 3 CORE GQ/GU RADIATORS
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

wat specific info are u after?
thats a very broad statement.....

also wat motor we talking here? injected / carbi / diesel etc etc

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

I belive the GQ TD42 radiator is the better of the lot. Have heard some of the comp petrol turbos have modded these to work with the TB42.
THOUGHT FOR THE DAY....
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

radiator

Post by bigpig »

core gu 350 chev strocke straight gas auto!! Is that enough info?? :roll:
Posts: 73
Joined: Wed Aug 11, 2004 8:16 am
Location: Morisset

Post by patrol_uterus »

Did nissan ever make a 4 core?
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

radiators

Post by bigpig »

Nobody said anything about 4 core radiators but i was given a quote of around $675 for a custom 3 core :lol:
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

I just picked up a Diesel radiator made in Adelaide for a customer and people swear by them for cooling . $490. He is using it on a 302 Clevo.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

radiator

Post by bigpig »

Once again is std or f**k of big with no tolerance 302 verses 350 strocker full hous i am also going to super charge it soon!!! :armsup: :armsup:
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

hey

Post by bucketofbolts »

so when are we gunna see this beast in action, hehe
bucketofbolts is sold, :(
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

beast

Post by bigpig »

Verry soon have 2 weekend soff to do heeps of work but still being stuffed around by radiator mobs . As soon as you tell them that is a 350 chev with a 400 billet crank roller camm and rockers inport heads ready to produce 650 brake hp as in my drage car they say :roll: im not sure if anything will keep it cool are you f**king mad for puting that in ? No just pissed . :shock: :armsup:
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

rad

Post by bucketofbolts »

cool, sounds good
bucketofbolts is sold, :(
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

How was it kept cool in the Drag car Champ.

Go and spend a $1000 on an all alloy radiator and go from there.

Or go and by a commodore radiator as they are pushing 295Kw.

You seem to be in the performance game why not ask what they use.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

Post by bigpig »

been there done that a gu rad is heaps bigger than com's :roll:

We also filled the cooling system with straigt coolant with a tripple core radiator but then the motor only ran for a couple of mins :!:

Also running on methenole fule which the more you put in the cooler it runs :D
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

BigPig, a friend of ours was running a 378 cube Cleveland (normally aspirated) in a full body and interior XW Falcon with a 4 core brass/copper radiator which he couldn't keep cool. It's over 500 bhp and is running consistent 10.9 quarters. We bought a PWR core and header tank assembly. (57mm thick) (2 cores, each core 26mm long) We welded it together because we can :lol: and with twin AU Falcon thermo fans he can now drive it through a long queue at Macca's drive through without it overheating. The fans just cut in and cut out.
This core is the same one the supercars use for their endurance races except they also have internal dimpling on the tubes (an extra core cost of 20 %)
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

rad

Post by bigpig »

thanks andrew could you pls get name and ph if at all posable or even get me a price your self :armsup: :armsup: :armsup: :onfire:
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Your best bet would be to give PWR in QLD a ring and ask what they have for GQ or GU as they have both built up as a complete unit. Unfortunately, they don't do anyone any deals and you could buy one for the same price that I could. Most of the stuff we do is custom build ups and the price they charge for custom cores is staggering, but they're so damn good at cooling. As an example I've just fitted a custom radiator to the guy next door at work's 460 cube big block 1960's F100 and the core cost (57mm thick) with a billet radiator cap neck was just under $600 and that was without all the work I put in to build up the radiator. (if I had wanted the dimple tubes it would have been an extra 20% on top of that)
Just make sure you get the 57mm thick core for your V8 application. and if GU one will fit in a GQ as it's top to bottom tanks versus crossflow for the GQ.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

rad

Post by bigpig »

Ihave a gu but all that info is tops :armsup: :armsup: :armsup: .

thanks heaps :lol:
User avatar
BAS
Posts: 3
Joined: Sun Jul 25, 2004 11:01 pm
Location: Victoria

Post by BAS »

We have a customer that has a gu patrol that kept getting hot. We tried an ARE radiator and it failed. Aussie dessert coolers made a radiator for us to fit and we just laughed at it when it arrived. PWR supplied a radiator that finally worked. The customer can sit on 160 to 175km/h for 48km with out the temp rising. PWR make heaps of this radiator and have given it its own part number. It all comes down to FPI Fins per inch. Contact PWR and save a heap of time.
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

Post by bigpig »

lso very good info thanks all input is welcom as i have ahd trouble keeping big boost cars cool :lol:
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

bigpig wrote:been there done that a gu rad is heaps bigger than com's :roll:

We also filled the cooling system with straigt coolant with a tripple core radiator but then the motor only ran for a couple of mins :!:

Also running on methenole fule which the more you put in the cooler it runs :D
Straight Water cools better than straight coolant. Too much coolant acts as an insulator.

Bazzle
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

Post by bigpig »

PLS show ratio for max cooling :bad-words: :bad-words: :2gunfire:
Posts: 66
Joined: Fri Apr 16, 2004 9:38 pm
Location: Brisbane QLD

chev

Post by FL33XN »

Scott ,u will have to make your exhaust headers up.block huggers dont fit that marks suppied..engine mount is the prob as u mentioned to me..

PWR are the way to go :D
105 series, 35' MTR's, 5'' lift ToughDogs, Twin Locked, Angry Bars, Front Radius arm Flip & X-Thingy.........................
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

Post by bigpig »

no shit did you come down in the rain tonight I told you that last time :finger:

Buy a nissan and you will understand :roll: :!: :idea:
Posts: 66
Joined: Fri Apr 16, 2004 9:38 pm
Location: Brisbane QLD

chev

Post by FL33XN »

dip _ _ _ _ :finger: i was leting u know that marks block huggers r no differnt 2 std block hug, as u asked.


understand the problems :!: :!: :!:
105 series, 35' MTR's, 5'' lift ToughDogs, Twin Locked, Angry Bars, Front Radius arm Flip & X-Thingy.........................
Posts: 55
Joined: Wed Jan 14, 2004 9:06 pm

huggers

Post by bigpig »

sorry dick sucker :!: but i already knew that due to the fact of trying 5x different sets of huggers that gauranteed they would fit but once again i was right then told them to fuck off i dont want your sponsership!!! :finger:
Post Reply

Who is online

Users browsing this forum: No registered users and 116 guests