Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to get body lift kits ?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 10
Joined: Wed Apr 20, 2005 8:44 am

Where to get body lift kits ?

Post by B-Man »

Where can I get a body lift kit that includes spacers, high tensile nuts, bolts , etc for a LWB NG Superwagon ?

Had a look under the rig yesterday - doesn't look too difficult to do - The fiddly bots seem to be brake lines, wiring and gearbox/transfer case.

Any help appreciated

Cheers,
Go here to find out how you can really help Tibet : http://www.atc.org.au/whatcanido/
Top
Posts: 265
Joined: Fri Apr 22, 2005 4:30 am
Location: South Aus

Post by smac »

where are you located?

i would think most 4wd shops would be able to supply them.

call Adrian at Intense Offroad in Adelaide (08) 8294 2325 - im sure he would be able to supply/send them to ya where ever you are.

from what ive heard/seen they arent too hard to do
2010 D4D Hilux
Top
Posts: 10
Joined: Wed Apr 20, 2005 8:44 am

Post by B-Man »

G'day - I'm in Sydney. But if this guy can supply and ship - no worries.

Thanks for that - I'll call them next week.
Go here to find out how you can really help Tibet : http://www.atc.org.au/whatcanido/
Top
Posts: 73
Joined: Mon Jul 14, 2003 7:05 pm
Location: Concord

Post by sascot »

B-man, i did my own lift inside 2hrs.
Any nut and bolt shop can provide the longer HT bolts (12 in all from memory). Went to an aluminium shop and had 2" solid alumin. pucks made up and predrilled for the bolts. All up these 2 parts cost $110. A new longer brake line for the rear, fiddle of the h.brake attachments and all is sweet. Remember to place large washers between the bolt head and the body as over time itflexes and cracks under the head. ;)
POOJAR NF V6 33" MT's 2" bod lift & usual addons for the shopping trolley.
Top
Posts: 15
Joined: Sat Jun 25, 2005 6:56 pm
Location: Hong Kong

Contact:
Contact hongkonger

Post by hongkonger »

hi a newbie question really - connecting different metals together is source for dielectric corrosion, does one fit an insulating washer or is the chassis aluminium - just read another post on a different that used un-named alloy for a 2" lift - just wondering........
98 3.5 V6 GDI LWB Auto tiptronic
NL/gen2.5
[url=http://4wd.blogeasy.com/]pics[/url]
[url=http://www.photobox.co.uk/album/4195618]Pics of new Pajero Launched 4 Oct 2006 in Japan[/url]
Top
Posts: 10
Joined: Wed Apr 20, 2005 8:44 am

Post by B-Man »

Thanks sascot - where did you get the machining done ?? And can you recall the length and width of the bolts needed ??

2 Hrs hey - I'm impressed - what level of mechanic/tradesman are you ? I'm pretty handy, wondering if I can do it my self ?

How did you lift the body ?

Did you do one side at a time ? One corner at a time ??

Thanks in advance.
Go here to find out how you can really help Tibet : http://www.atc.org.au/whatcanido/
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

There are no Pajero specific body lift kits available in Oz only out of Japan.
It's cheaper to buy the tube (whether you use Aluminium or Polyurethane) and have a machine shop make them up for you (or anyone with a lathe).
Here's a link to a Gen 2 body lift (2") install :-

http://www.cap510.com/bodylift.html
I just luv my "clacker Jabber"
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 20 guests