Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Oily Glow Plugs
Moderators: toaddog, Elmo, DUDELUX
Oily Glow Plugs
Guys, if you have oil on 2(next to each other) out of your 6 glow plugs, What does this meen?
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
pull them out and put them across the battery for a few seconds, they should glow red hot. if they work, then it's possible you have some bore glazing preventing good oil control (or the rings are just plain worn out), give it an oil change using some oil flus concentrate stuff (200ml of diesel in the oil will do), then take it for a good hard run. you might get back a tad of power you didn't know you had.joelthommo wrote:As far as I know yes.
cheers
Free air locker to the first 20 callers!
What is meant by that? I've heard it before but don't quite understand it Also is it safe, if the battery puts on 12V wont it kill my plugs?( I'm asking this not knowing how many volts go into my plugs)dumbdunce wrote:pull them out and put them across the battery for a few seconds, they should glow red hot. if they work, then it's possible you have some bore glazing preventing good oil control (or the rings are just plain worn out), give it an oil change using some oil flus concentrate stuff (200ml of diesel in the oil will do), then take it for a good hard run. you might get back a tad of power you didn't know you had.joelthommo wrote:As far as I know yes.
cheers
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
no it won't kill your plugs.joelthommo wrote:What is meant by that? I've heard it before but don't quite understand it Also is it safe, if the battery puts on 12V wont it kill my plugs?( I'm asking this not knowing how many volts go into my plugs)dumbdunce wrote:pull them out and put them across the battery for a few seconds, they should glow red hot. if they work, then it's possible you have some bore glazing preventing good oil control (or the rings are just plain worn out), give it an oil change using some oil flus concentrate stuff (200ml of diesel in the oil will do), then take it for a good hard run. you might get back a tad of power you didn't know you had.joelthommo wrote:As far as I know yes.
cheers
bore glazing is where the inside of the cylinders gets coated with a glassy varnish which makes them look very shiny and prevents the rings from sealing propery. it happens to motors that don't get loaded or spend too much time at constant rpm.
Free air locker to the first 20 callers!
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
True, some glowies are rated at 7 and 11 volts.joelthommo wrote:What is meant by that? I've heard it before but don't quite understand it Also is it safe, if the battery puts on 12V wont it kill my plugs?( I'm asking this not knowing how many volts go into my plugs)dumbdunce wrote:pull them out and put them across the battery for a few seconds, they should glow red hot. if they work, then it's possible you have some bore glazing preventing good oil control (or the rings are just plain worn out), give it an oil change using some oil flus concentrate stuff (200ml of diesel in the oil will do), then take it for a good hard run. you might get back a tad of power you didn't know you had.joelthommo wrote:As far as I know yes.
cheers
Built, not bought.
valve stem seals are never much of an issue on diesels as there is never much manifold vacuum. even though the 2H uses a throttle butterfly to control fueling there is also a large bypass and there is never significant vacuum.joelthommo wrote:Guys, tested all 6 glow plugs today at Tafe. All worked fine:). although plug number 1 and 2 had a lesser amount of oil. I've been told that it's possibaly the rings or the valve stem cover.
are the plugs actually wet with oil, or just black? if black, it could be a symptom of overfuelling. how much exhaust smoke do you get, and what colour is it?
Free air locker to the first 20 callers!
They were black but that was just carbon build up I gather. When I first check about a month ago they were covered in the oil. Now I checked again tonday and there was minimal oil just under the lowest part of the thread. I was told to look for blue smoke, but I've never ever seen blue smoke only faint white/grey smoke sometimes on starup/takeoffs.dumbdunce wrote:valve stem seals are never much of an issue on diesels as there is never much manifold vacuum. even though the 2H uses a throttle butterfly to control fueling there is also a large bypass and there is never significant vacuum.joelthommo wrote:Guys, tested all 6 glow plugs today at Tafe. All worked fine:). although plug number 1 and 2 had a lesser amount of oil. I've been told that it's possibaly the rings or the valve stem cover.
are the plugs actually wet with oil, or just black? if black, it could be a symptom of overfuelling. how much exhaust smoke do you get, and what colour is it?
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Who is online
Users browsing this forum: No registered users and 1 guest