Tried a search but came up with nothing to do with what I want, so either I suck at searching or this has never come up.
How many k's can I roughly expect from a stock engine ? Well atleast before major issues that cost the $s
I know this would depend on if its been thrashed, how well its looked after and whatever else. But even worst case scenarios would be helpful.
Because mines done over 215 000 and from what I've been told 4 bangers don't last as long as bigger engines and even they can start having trouble at that much.
But then again it seems they can take a bit of a beating. So not really sure.
Also as a slightly less important question, out of interest, can the EFI from an old Swift or Barina be relatively easily put onto a Sierra engine ?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine life.
engine life.
"It has the aerodynamics of a brick." - Comment about the Sierra by my dads mate.
Well I thought early 90s swifts had injection. I remember reading some article on the net and the guy was fixing up an old Swift (with SOHC engine) and was saying about the ECU, plus the engine is apparently TBI (atleast for the 1992 SOHC).
Know you can't always trust the net but I'd always personally thought they did.
Anyway, previous history is. Most of its life owned by a grandad, 3 years in the hands of a uni student and then onto me for about 6 months so far.
Hopefully it should last maybe another 10 000 or more. But should have quite a bit more money near the end of the year to do something with the it, doubt it'd rack up more than another 1-2k in that time. Just wanted to make sure it can last till then.
Know you can't always trust the net but I'd always personally thought they did.
Anyway, previous history is. Most of its life owned by a grandad, 3 years in the hands of a uni student and then onto me for about 6 months so far.
Hopefully it should last maybe another 10 000 or more. But should have quite a bit more money near the end of the year to do something with the it, doubt it'd rack up more than another 1-2k in that time. Just wanted to make sure it can last till then.
"It has the aerodynamics of a brick." - Comment about the Sierra by my dads mate.
if its a case of prolonging it, just change oil and all filters, run some engine clean out stuff through it and give it a good tune up... mate of mine did this on a barina he drove which was well and truly dying - and it lasted another 9 months of performing PERFECT before returning to its previous point of .. well... crap =)
check all ya hoses too - mine only died at 220 cos i burst a pipe and didnt realise until my choke came on cos i had no rad fluid - so i cooked it driving out of the track and home (30km)! haha
check all ya hoses too - mine only died at 220 cos i burst a pipe and didnt realise until my choke came on cos i had no rad fluid - so i cooked it driving out of the track and home (30km)! haha
The worst thing about censorship is ███████.
suzisport kit is $550 plus frieght includes 4 x Pistons & Pins , Piston Rings, Big End Bearings , Main Bearings , Thrust Washers,Timing Belt , Water Pump , Timing Belt Tensioner, Complete Gasket Set, Welsh Plug Set, Torque setting sheet and Timing setup sheet.DrCarlo wrote:How much does a rebuild on these things cost?
89 lux 2bl 4inch spring 35's etc still slow as a snail
Yeah you might be right... there's some odd models floating aroundAcca Dacca wrote:Well I thought early 90s swifts had injection. I remember reading some article on the net and the guy was fixing up an old Swift (with SOHC engine) and was saying about the ECU, plus the engine is apparently TBI (atleast for the 1992 SOHC).
Know you can't always trust the net but I'd always personally thought they did.
Anyway, previous history is. Most of its life owned by a grandad, 3 years in the hands of a uni student and then onto me for about 6 months so far.
Hopefully it should last maybe another 10 000 or more. But should have quite a bit more money near the end of the year to do something with the it, doubt it'd rack up more than another 1-2k in that time. Just wanted to make sure it can last till then.
a bloke at work had a 1600 TBI swift, he said it was an import but
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Suzuki Australia's website has an article on a 86 sierra doing Edit: thanks alien i suck at maths 
600 000kms + without rebuild, the owner simply followed the service maintainance schedule 
I'm guesssing the guy has had it from new but it's a nice thought
600 000kms + without rebuild, the owner simply followed the service maintainance schedule I'm guesssing the guy has had it from new but it's a nice thought
Last edited by Santos on Fri Jul 01, 2005 10:36 pm, edited 1 time in total.
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Don't think mine'll do that many.
Previous owner drove around in it running on only 3 cylinders for a bit, might have put some extra strain on the engine.
But yeah, I've serviced it myself, new plugs, oil, oil filter and air filter. Timing was retarded so advanced it to factory tiiming and corrected the idle speed. Running it on premium in the hope that might squeeze a bit of extra life from it. Probably won't but it doesn't cost much more for only a 40L tank.
Anyway, I'm going to look after it and not thrash it. Can't afford to replace/rebuild it at the moment.
OldGold: Well your probably right that normal swifts that aren't GTi don't have EFI. I probably just found out about some rare/overseas model or something.
Previous owner drove around in it running on only 3 cylinders for a bit, might have put some extra strain on the engine.
But yeah, I've serviced it myself, new plugs, oil, oil filter and air filter. Timing was retarded so advanced it to factory tiiming and corrected the idle speed. Running it on premium in the hope that might squeeze a bit of extra life from it. Probably won't but it doesn't cost much more for only a 40L tank.
Anyway, I'm going to look after it and not thrash it. Can't afford to replace/rebuild it at the moment.
OldGold: Well your probably right that normal swifts that aren't GTi don't have EFI. I probably just found out about some rare/overseas model or something.
"It has the aerodynamics of a brick." - Comment about the Sierra by my dads mate.
my drover did 290 000km before oil got shot out of it everywhere. read an article somewhere that reconned the life-span of the motors was about 190 000km. i decided to rip out the old motor and put in a 94 model gti DOHC motor to give me extra power. if going to the trouble, may as well make it worthwhile.
dude 600 000 is far from 6 million 7 figures for millions 6 for hundred thousands .alien wrote:6 million km?! holy crap! surely you mean 600 000???
6 million means he could have gone around the world almost 150 times (at the equator) by now! which means he was doing 315,790km per year, or 865km per day! lol
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Posted: Sat Jul 02, 2005 7:41 pm
--------------------------------------------------------------------------------
my drover did 290 000km before oil got shot out of it everywhere. read an article somewhere that reconned the life-span of the motors was about 190 000km. i decided to rip out the old motor and put in a 94 model gti DOHC motor to give me extra power. if going to the trouble, may as well make it worthwhile.
Is there any reson why the lifespan of a reco motor is shorter than the original?
prob cause everything is already slightly enlarged, eg bore and yet the new pistons and rings still stay the factory size. also the main bearing journal on the crankshaft would be slightly worn, only ever so slightly. also depends on how the motor is worn in, if it is booted around the first corner after just being rebuilt, thats never good, cause all the parts are new. also, not all suzis reach 290,000.
zook comming soon......
I have a mate that used to race Dunnydoors and Nissin GTR's at Bathurst. He reckons they would only use a 2nd hand block for their race motors because they have been "cured" and are worn in. Also I reckon if you do NOTHING else in the way of servicing AT THE VERY LEAST change air, engine and fuel filters when needed. PS My 1ltr just blew up because of a @$#%^&$%# $20 thermostat not opening.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
the 1600 tbi's where australian delivered i know because i have my second one out on the front lawn.They only came out in a limited number of swift sedans i think 90-92 very good engine heaps of powerOldGold wrote:Yeah you might be right... there's some odd models floating aroundAcca Dacca wrote:Well I thought early 90s swifts had injection. I remember reading some article on the net and the guy was fixing up an old Swift (with SOHC engine) and was saying about the ECU, plus the engine is apparently TBI (atleast for the 1992 SOHC).
Know you can't always trust the net but I'd always personally thought they did.
Anyway, previous history is. Most of its life owned by a grandad, 3 years in the hands of a uni student and then onto me for about 6 months so far.
Hopefully it should last maybe another 10 000 or more. But should have quite a bit more money near the end of the year to do something with the it, doubt it'd rack up more than another 1-2k in that time. Just wanted to make sure it can last till then.
a bloke at work had a 1600 TBI swift, he said it was an import but
P.E.T.A
People eating tasty animals.
People eating tasty animals.
nickw86au wrote:Posted: Sat Jul 02, 2005 7:41 pm
--------------------------------------------------------------------------------
my drover did 290 000km before oil got shot out of it everywhere. read an article somewhere that reconned the life-span of the motors was about 190 000km. i decided to rip out the old motor and put in a 94 model gti DOHC motor to give me extra power. if going to the trouble, may as well make it worthwhile.
Is there any reson why the lifespan of a reco motor is shorter than the original?
the ONLY reason is because out of factory, each, and every motor is balanced, and blue printed which barely anyone does these days as they have no idea of the advantages it can provide. most people cant justify spending huge amounts of dollars to blue print, and balance a motor, but creates slightly more power, and makes sure everything is running all in time, and balance with each other, causing the motor to last that bit longer.
That's true, but Dunnydores and GTRs have cast iron blocks, whereas G13s are alloy.Vineboy wrote:I have a mate that used to race Dunnydoors and Nissin GTR's at Bathurst. He reckons they would only use a 2nd hand block for their race motors because they have been "cured" and are worn in. Also I reckon if you do NOTHING else in the way of servicing AT THE VERY LEAST change air, engine and fuel filters when needed. PS My 1ltr just blew up because of a @$#%^&$%# $20 thermostat not opening.
The only reason?97zook wrote:the ONLY reason is because out of factory, each, and every motor is balanced, and blue printed which barely anyone does these days as they have no idea of the advantages it can provide. most people cant justify spending huge amounts of dollars to blue print, and balance a motor, but creates slightly more power, and makes sure everything is running all in time, and balance with each other, causing the motor to last that bit longer.nickw86au wrote:Posted: Sat Jul 02, 2005 7:41 pm
--------------------------------------------------------------------------------
my drover did 290 000km before oil got shot out of it everywhere. read an article somewhere that reconned the life-span of the motors was about 190 000km. i decided to rip out the old motor and put in a 94 model gti DOHC motor to give me extra power. if going to the trouble, may as well make it worthwhile.
Is there any reson why the lifespan of a reco motor is shorter than the original?
Potentially inferior parts? Reco parts coming from cheap factories instead of Suzuki?
my sierra has done 402 000 K's but i dont know the history of it so its possible it has been rebuilt half of its life ago haha. anyways im an engine re-builder and im pretty sure i did a quote for a sierra engine not long ago for $1400, that includes crank being re-ground ontop of all the usuall like new pistons, and bore and hone the block. if anyone is interested we are called ingear industries and we are on the gold coast (aus) PM for more info
but i dont know the history of it so its possible it has been rebuilt half of its life ago haha. anyways im an engine re-builder and im pretty sure i did a quote for a sierra engine not long ago for $1400, that includes crank being re-ground ontop of all the usuall like new pistons, and bore and hone the block. if anyone is interested we are called ingear industries and we are on the gold coast (aus) PM for more info
$1400????redhotzook wrote:my sierra has done 402 000 K's
might as well buy an injected motor and install it for that price!
mate, thats 20-40 thou over pistons, quick porting to get rid of any noticeable steps and mis-shapes. you get alot for how much u pay. u cant base it on what the engine is worth though. if u give me a SR20det engine (which is worth $1500-$2500) the cost of a rebuild is only gonna be like $20 more cause there are more valves in each cylinder. u know...???
is that the mob in on kendor stredhotzook wrote:my sierra has done 402 000 K's
near gibbs?[color=green]Vote Earth[/color]
Who is online
Users browsing this forum: No registered users and 24 guests