Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HiSteer

Tech Talk for Jeep owners.

Moderator: GUtripper

Forum rules
Post Reply
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

HiSteer

Post by Wooders »

Just wondering if anyone has giiven much thought to a TJ Highsteer setup?
I know Suburban have been playing with it - but not much has been said.....
So I was wondering if anyone had more news or ideas???
I'd love to more to a HiSteer but don't want to spend much $$$ on a Dana30 so ideally a cost effective suggestion.....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 480
Joined: Thu Oct 24, 2002 11:34 am
Location: syd

Contact:
Contact billsta

Post by billsta »

wooders, have a look at a WJ D30 steering knuckle.. (pas side)
that may strike some thoughts...


:mrgreen: :roll:

edit... frame proof action
Last edited by billsta on Tue Nov 19, 2002 10:11 am, edited 1 time in total.
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Sorry Bill, I'll direct my next tech question about carpet to there :splat:
Hmm thanks for the tip - I'll have a look see....

I'm still thinking longer term will be the front end swap - which hopefully will include HiSteer....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 480
Joined: Thu Oct 24, 2002 11:34 am
Location: syd

Contact:
Contact billsta

Post by billsta »

ya.
:mrgreen:
Top
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Contact:
Contact CJer

Post by CJer »

Wooders Sam has a Dana 60 for sale
would that help ???
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Front Dana60?? I'm interested :D
BTW here's a US dana30 HiSteer...But I thinks it might be a tad expensive to get here....
Image
Image
Sold by DownEastOffroad
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 480
Joined: Thu Oct 24, 2002 11:34 am
Location: syd

Contact:
Contact billsta

Post by billsta »

where does the damper go?
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

See the hole in the middle of the tie rod? I'd guess there...
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

bling fawkin bling!!

AFAIK wooders sam has a complete chevy dana 60 full width and wants $2500
hands and mums dont count!!!
Top
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

Give me some more details on the 60 please.
May be interested. whats sams email addy? and where is he?

Wooders - Look at the goferit tie rod flip kit for a nice cheap solution.
Well it is not full high steer but it does get the tie rod a bit more out of the way and all for the grand sum of US$28

http://www.goferitoffroad.com/products.htm
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Zach,

Interesting...Is is only for one side - would be nice if could be installed on both sides....Doesn't address the Panhard rod, so I'd guess you'd need to relocate that to avaoid bumpsteer...

I wonder what the ADR's & Engineers would have to say about it.....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Contact:
Contact Liam

Post by Liam »

We get billet high steer arms for dana 44's, haven't ever tried for anything else. A few different configurations are possible depending on what knuckles you have and whether you wish to run one or two arms.
It's also possible to run chevy k20 truck knuckles and spindles ( have to redrill the caliper mounts)
www.bbmotorsports.com.au
Top
Posts: 480
Joined: Thu Oct 24, 2002 11:34 am
Location: syd

Contact:
Contact billsta

Post by billsta »

hey no panhard rod?mm..
have you seen that proto type tera long arm a little while ago? they triangulated the front end as well as the rear.. cant remember if they did anyhitng with a hi-steer...
Top
Posts: 384
Joined: Sun Oct 20, 2002 8:26 pm
Location: Springfield/ QLD

Contact:
Contact CJer

Post by CJer »

Wooders and ZZZZ Sam is strangerover
http://www.outerlimits4x4.com/PHP_Modul ... rofile&u=2
his email is there
Top
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

Wooders wrote:Zach,

Interesting...Is is only for one side - would be nice if could be installed on both sides....Doesn't address the Panhard rod, so I'd guess you'd need to relocate that to avaoid bumpsteer...

I wonder what the ADR's & Engineers would have to say about it.....


bah! bumpsteer, couldn't give a rats ass about that onroad crap :)
US$28 and very cheap for shipping as it is so small is a good price for that little doohicky. Raise one end of your tie rod by 1-2" and the other end will even lift a tiny bit as well.

Don't bother doing high steer on your dana30 - just not worth polishing that turd any more than you have to. hehe. :D
Top
Post Reply

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 2 guests