Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fitting adjustable panhards

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

fitting adjustable panhards

Post by Madmac »

well following my previous thread ive lashed out and bought an adjustable tough dog item for the rear, ill buy the front one next week. is there any trick to fitting them. is their specific points i should take measurements from to determine what length i should adjust it to?
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

With normal load measure between tyre wall and inner guard/chassis rail. Adj so lboth within 5mm or so.

Bazzle
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

thanks for that bazzle, im going to have a crack at it now, got some 3rds trailing arms too, all sounds simple enough
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Yeah. real easy to fit. :D
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Post by Area54 »

bazzle wrote:With normal load measure between tyre wall and inner guard/chassis rail. Adj so lboth within 5mm or so.

Bazzle
Perfectly acceptable method.

If you are looking for that micro adjustment (perfectionist) you can use a plum bob to align the diffs, park the rig on flat level concrete for best results though.
Built, not bought.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest