Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fitting 35's

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 9
Joined: Tue Jun 21, 2005 5:26 am
Location: Sweden

fitting 35's

Post by slhap »

i'm just about to a spoa conversion on my F75, how much more do i need to lift my truck to be able to fit 35's.

how big tyres can i fit after the spoa?
my shit always works sometimes.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

One problem with fitting those size tyres will be gearing. With the piss poor standard gearing ratios in the rocky, fitting 35's will throw everything out of whack.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 34
Joined: Sat Aug 09, 2003 7:37 pm
Location: Riverland SA

35" tyres

Post by Benszook »

If you swap to hilux diffs at the same time with the standard 4.8s ratio or whatever they are 35s will be perfect. I have 33s with spoa hilux diffs and the top speed is about 90kmh comfortably you can push it to 100 but you start chewing the diesel.

Cheers,
Ben
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

okay, so you've sent me the PM. Sorry, didnt realise which forum that was for. I would have to agree with Layto, the gearing with 35's would be horrendous. You can make anything fit, just depends on how good, or otherwise, you are with a grinder. May need wheels spacers or offset rims to stop tyres from hitting stuff.
Heath & Melissa - 93 GQ LWB.
Posts: 9
Joined: Tue Jun 21, 2005 5:26 am
Location: Sweden

Post by slhap »

today i'm running on 31x11,5 R15 original suspension. my front tyres rub against the frame when turn the wheels to much, spacers are on the way. i also plan to cut out my fenders a bit.

if i run on 33's, am i still gonna have problems with the gearing?

about the hilux diffs, should i just change the diffs or the whole axel?
any special year of the hilux?
my shit always works sometimes.
Posts: 9
Joined: Tue Jun 21, 2005 5:26 am
Location: Sweden

Post by slhap »

I been thinkin a bit.. I think i'll skipp the 35's and go for 33's instead.

is there a special year of the hilux diffs I should be lookin for? here in sweden we also have the Volkswagen Taro, wich is the exact same car as the hilux, so it shouldn't be to hard finding new diffs.

will I be able to use the original props from the transfer case to the diffs or won't they fit?

anybody that has done this transplantation before, I'd like just about all the tips in the world..
my shit always works sometimes.
Posts: 44
Joined: Thu Feb 17, 2005 7:23 am
Location: Rijkevorsel Belgium

Post by gonzo4x4 »

Hello,
the gearing can handle 35" tyres, we have 4 Rocky's with that size of tyres on it and original gearing, only the 5th gear is a bit difficult to drive.
Now my friend is gone get 38.5x11R15 super swamper boggers on his Rocky and swaps the diffs from a F20 (ratio3.363 to 4.777)
greetz Gonzo
Daihatsu F50 with 37" Simex tyres for battle
Daihatsu Rocky with 33" Blackstar tyres for normal off-road and daily drive
Posts: 461
Joined: Thu Jan 01, 2004 7:23 pm
Location: Kuala Lumpur, Malaysia

Post by BabyGodzillaGTi-R »

I've a few friends who are using 35 inch on the crapy 3.9 original ratio. Well it still seems to move but i say is stupid. I'm also going for the same route soon once i can get hold of an F20 final drive which i've just found recently.

As for fitting 35inch on Rocky u can either go for spring over axle. But i've seen a few in action and i had to recover a few after turning turtle going down hill.
Another way would be a typical 3 inch lift and cut the fenders. Ugly but effective and safe.
My RIG sucks big time.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest