Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

36" cetrepedes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

36" cetrepedes

Post by Tiny »

what is the actual outside dia on these, I am told the measure 35.4" is this correct?
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 8
Joined: Thu Feb 17, 2005 1:35 pm
Location: Rye, Vic

Post by dazz mav »

Overall diameter when new is 920 mm (36.2")
93 diesel mav. Basic truck at the moment but plans are brewing.... 4" spring, OME shocks, adj panhard, castor bushes, usual other. Wanting 9000lb winch, cargo barrier.
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

dazz mav wrote:Overall diameter when new is 920 mm (36.2")
thanks
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

so you need to wear a touch off before trials cause you go up a class over 36"
Top
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Contact:
Contact Big Red Toy

Post by Big Red Toy »

depends on the air pressure & rim width when measuring but they are give or take abit around 36" :roll: :roll: :roll:
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Top
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

Post by 80 nsw »

depends on the air pressure & rim width when measuring but they are give or take abit around 36"
Rolling diameter isn't affected by air pressure. even if the tyres are flat, it will still have the same rolling diameter
Top
Posts: 410
Joined: Tue Nov 16, 2004 11:05 pm
Location: Ipswich, Queensland

Post by Mytqik »

80 nsw wrote:
depends on the air pressure & rim width when measuring but they are give or take abit around 36"
Rolling diameter isn't affected by air pressure. even if the tyres are flat, it will still have the same rolling diameter
ummm, I don't think soo.

If they only have 5psi in the & bag up, the distance betwwen the centre of the wheel & the ground will be less than if you have 45psi in them & square shoulders on the side wall.

If you change the distance between the centre of the wheel & the ground you will effect the rolling diameter.
2005 GU3 Patrol ST Ute
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Diameter changes with lower pressure but rolling circumference is fixed at the tire size.
KRiS
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 150 guests