Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

32's or 33's for 88 5 speed rr.

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 23
Joined: Tue Jan 25, 2005 7:13 pm
Location: Brisbane

32's or 33's for 88 5 speed rr.

Post by Tobias »

The time has come for some new bigger rubber. I currently have 31/10.5's and i've got a 2inch spring lift and one inch body. I have a set of 16inch disco rims that i was thinking of fitting a set of 265/75's but should i stay with the current 15's and fit bigger 33/10.5's? i don't mind cutting the gaurds a bit. Any ideas on what size to go?

Also will the 5speed handle it ok? because 1st high isn't that short.

thanks
Toby.
88' rangie, 2inch spring lift 1inch body. snorkel Front Air locker Rear Maxi Drive locker, 265/75 BFG mud few other mods.
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

Go 35" and add a 30mm spacer to your springs. ;)

Then start cutting out whatever rubs - you don't need that bit anyway. :twisted:

Micka
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests