DIY fridge slide

Post by **FL33XN** » Sat Jul 09, 2005 6:36 pm

Anyone have a good design

for a fridge slide for a 80 litre Waeco

Thanks

Post by **Boopa** » Sat Jul 09, 2005 7:57 pm

Dunno if this helps?

A dude on ebay is selling HD 100kg rated runners for $50 at the moment.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 36594&rd=1

They're not big enough for me, but he says he;ll do 900mm long buggers for about $140 plus shipping.

Post by **FL33XN** » Sun Jul 10, 2005 3:03 pm

thanks Boopa.i would need the 900mm ones aswell ,do u have a phone num 4 old mate selling them

.

Post by **GUJohnno** » Sun Jul 10, 2005 3:58 pm

I would use heavier runners than that for an 80Ltr fridge.
100kg runners are fine for 5oLtr fridges.

I would suggest 150kg runners would last longer.

Remember, the runners are designed and rated for drawers at home not in the back of a 4by that would be subjected to corrugations and dust etc.

Post by **FL33XN** » Sun Jul 10, 2005 4:24 pm

might have to fab up some using angle iron and bearings then..u think

Post by **GUJohnno** » Sun Jul 10, 2005 4:26 pm

Yep, sealed bearings would work great and be heaps cheaper
The ones I use are Chinees made sealed bearing with a 22mm diameter to suit an 8mm bolt. Cost around $1.50 each if you buy enough of them.

Post by **FL33XN** » Sun Jul 10, 2005 4:33 pm

thanks GU. ill do that....

Outer Limits 4x4 Board

DIY fridge slide

DIY fridge slide

diy

diy

diy

Who is online