Hi, Has anyone in the ACT area got a 23 spline gearbox or transfer case on the floor.
I am looking for one to check a spline fit.
Alternatively does anyone know if the 23 spline auto trans output from jeep is the same one on a mitsubishi 23 spline auto?
Thanks and regards, Al
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
23 splines
Moderator: GUtripper
i suggest http://www.ausjeepoffroad.com its a jeep forum
[quote="CJ Burns Esq"]an LS1 is like a retard on viagra,
they'll stick it into anything...........[/quote]
they'll stick it into anything...........[/quote]
Ask and you shall recieve 
Read this page...and stare at the pretty pictures
http://www.novak-adapt.com/knowledge/np231.htm
If you were in Melb I can find you a spare case.
cheers
z
Read this page...and stare at the pretty pictures
http://www.novak-adapt.com/knowledge/np231.htm
If you were in Melb I can find you a spare case.
cheers
z
And this is a jeep forum ! Why do they have to go there ??goodie wrote:i suggest http://www.ausjeepoffroad.com its a jeep forum
Alot or the people on Ausjeep also come here. Is there something wrong with answering the question on this site ?
Zach seemed to have managed it very well and Bitsamissin's is a brain when it comes to Mitz's.
Going "there"
Hi CJer,
I did not mean to devalue any info the jeep section has. I always find it useful.
I have both a 44 willys and a replica of the same based on a mitsubishi chassis so I genuinely asked my question in both forums and was grateful for all the info.
Thanks again for your help.
Al
I did not mean to devalue any info the jeep section has. I always find it useful.
I have both a 44 willys and a replica of the same based on a mitsubishi chassis so I genuinely asked my question in both forums and was grateful for all the info.
Thanks again for your help.
Al
Who is online
Users browsing this forum: No registered users and 17 guests