Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting 75 series landcruiser bullbar onto bundera

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 46
Joined: Sat Feb 05, 2005 12:15 pm
Location: Sydney

Fitting 75 series landcruiser bullbar onto bundera

Post by Rock Wallaby »

Hey guys,

just got a couple of second hand 75 series bullbars at work and want to know how easily it is to fit them on a bundera? is there any drilling or can they not completly fit at all?

regards

Dan
You are your own worst enemy!
Top
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

bullbars

Post by Gibonator »

just mesured me bundy in the dark, was 615cm between chasis rails so i dont know how acurate it is. but the landcruiser manual says the chasis 630 apart so maybe it might, just depends on the dark
FJ 73, army green ,snorkel, high mount, dual bats,draws,
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

My Middy had a modified 80 series Bull bar fitted when I bought it. The cross peice blocked the headlight. Sounds a little off topic but my point is that if it fits the chassis rails, a body lift can solve the headlight problem more easily than trying to weld new mounts... and you have a body lift!
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 382
Joined: Fri Dec 06, 2002 8:15 pm
Location: Diamond Creek

Contact:
Contact DNA Off Road

Post by DNA Off Road »

Drag out the tape measure and do some cross checking yourself – I have been told [could be some BS too] that measurements can differ a significant amount up to 30 mm. My 75 is 726mm to the outside of the frame rails for what it is worth…
Stock 'Cruiser X 2
www.dnaoffroad.com.au
Top
Posts: 183
Joined: Sun Nov 10, 2002 7:05 pm
Location: Melbourne

Contact:
Contact Bundytime

Post by Bundytime »

it will bolt stright on!!!! i have one on mine!!! its my third bundy and they have all fitted. the only difference is the length of the front guards and bonnet but most other 7# series parts will bolt onto bundys.
Top
Posts: 167
Joined: Sun May 22, 2005 5:59 am

Post by harvey »

i asked ARB if their 75 series bull bars would fit on my 70 series and they told me 'yes'. so i'd be surprised if it wasn't a straight swap over.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 62 guests