Is there a way of reducing the length of the hubs from the axle stub.
IE: it looks like you need a massive offset rim on a zook to keep the hub inside the tyre profile. unlike the zook hubs.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Shortening hilux hubs.
Moderators: toaddog, Elmo, DUDELUX
Shortening hilux hubs.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Re: Shortening hilux hubs.
Its not realy possible other than fitting Drive Flanges Which may give you 1". The wheel bearings are right behind the free wheeling hub.nicbeer wrote:Is there a way of reducing the length of the hubs from the axle stub.
IE: it looks like you need a massive offset rim on a zook to keep the hub inside the tyre profile. unlike the zook hubs.
cheers
Who is online
Users browsing this forum: No registered users and 0 guests