I was checking my turbo today and noticed the 3 of the 4 studs that join the turbo to the dump pipe were gone and is only being held roughly in place by the bottom stud/nut.
I was going to replace the stud/nut with bolts and am wondering if it is a bad idea to use locktite or something like that on the cast housing of the turbo so it mightn't happen again.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbo dump pipe studs.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Who is online
Users browsing this forum: No registered users and 6 guests