Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front wheel bearing size

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Front wheel bearing size

Post by Tiny »

for GQ any one know, or have a part number, prolly not worth going to nissan, if any one sells them I need two bearings and two hub kits
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Front wheel bearing size

Post by bogged »

Tiny wrote:for GQ any one know, or have a part number, prolly not worth going to nissan, if any one sells them I need two bearings and two hub kits
ebay... hub kits
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

CBC will have all you need,
Top
Posts: 47
Joined: Wed Apr 14, 2004 11:07 pm
Location: Barden Ridge (Menai), NSW

Post by mud13s »

Go CBC,

Just did the bearings in my truck (MQ not GQ) but got the bearings from the local auto parts, all they did was open the catalogue and order them from CBC then put on a comission :bad-words:

Will get the yellow pages out next time!

Paul
Top
Posts: 4
Joined: Sun Apr 10, 2005 12:11 pm

Post by dirtdodger »

Inner bearings
HR3310J Cup
HR331OJA Cone
Note the inner has a larger than normal radius on the cone. Hence the "A"
If you try to fit a bearing without the correct radius , you will be in deep do do.

Outer bearings
LM501310 Cup
LM501349 Cone
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests