Cruiser Rims

[Roktruk]

Are Prado rims the same offset as an 80 series?

[bj on roids]

change of wheels from factory fitted regardless of the model designation needs engineers approval.

I beleive the prado runs more BS than an 80 series, but not much. Then again it depends on the model and specs for each model.

(Thats if both are GXL)

[Paul]

Roctruk,

Go have a look at Canberra Toyota Fyshwick. Go down the side of the building past the service bays and just behind the chain link fence, by the gate, in the grass are/were a couple of 16x7 Prado rims and 16x8 80 series rims. Might be the easiest just to measure them up.

Paul.

[Roktruk]

Thanks, I might see if they're for sale. Generally these things are like rocking horse $h!t.

The good info through Goodyear in Fyshwick was they are not interchangable, the Prado is set further back and will foul on the inside on an 80.

I'm running stock 4-runner rims at the moment, only 16x6 so won't take the planned 285 MTRs

[adrian]

i run prado rims on my 80 they fit with no rubbing

[RUFF]

Here is a better pic of Adrians rig

[Paul]

Not sure about the 80, but they will not clear on a 93 Lux solid axle (first hand experience).

Paul.

[adrian]

got prado rims on my new toy too 8)

[RoldIT]

got prado rims on my new toy too 8)

No shadow ... nice try!