Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What oil for floor jack?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

What oil for floor jack?

Post by Nev62 »

What oil to use for floor jack? Power steer? brake/clutch? Auto trans? Can any of these be used?
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 47
Joined: Sun May 02, 2004 11:47 pm
Location: Dubbo, NSW, Oz

Post by smiley »

Auto Trans fluid works well, we use it in our jacks at work to lift aircraft.
Duct tape is like the force it has a Dark side a Light side and holds everything together
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

yep auto trans is the go
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

Cheers Guys
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 90
Joined: Fri Jan 28, 2005 3:10 pm

Post by Dodger »

:D Penrite Hydraulic oil.
Available at Super Cheap and many other outlets. :armsup:
Gotta Getaway
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

smiley wrote:Auto Trans fluid works well, we use it in our jacks at work to lift aircraft.
Good to hear because this is what I used recently :)

(ps it's been working fine.)
This is not legal advice.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests