Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Handbreak problems

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Handbreak problems

Post by jbell »

No not the misses. 86 county, every time I use the
handbreak it jams on. Have to belt the drum to realease it.
Real pain when your in a hurry. Is there a return spring or
something in the drum to realease it that may be stuffed???

Thanks Jeff
rover money pit on mogs !!!
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

yep.. there are springs inside ;)
You do not have the required permissions to view the files attached to this post.
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Might be oil on the shoes. Is there oil dripping out the drain hole in front of the drum?
reagrd s Philip a
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

i would have thought that oil on the shoes would allow them to slip... not jam up
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Think about grabby brakes. It gets gooey when mixed with the dust.
it really doesn't matter as he will have to pull it apart anyway.
"All will then be revealed" but he may need a new rear tcase seal and felt and a lot of brake cleaner.
Regards Philip A
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

Thanks for the replies, pulling it all apart is this saturdays job!!

what fun, Ill let you know what I find.

Jeff
rover money pit on mogs !!!
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Jeff,

I'm not sure about your model, but my 84 has 2 small rollers in the actuator for the brake shoes. These fall out when you disassemble and are easy to miss.

The handbrake doesn't work too well with 1 missing, and if both were missing it might give the problem you have.
John
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

Bush65 thanks for your tip about the rollers, they can
be missed easy, I thought they were just bits crap that
was helping to jam things up, until I washed it all up.
Dont think it had been cleaned in there for 10 years!!
Know wonder the thing wouldnt work pistons were rusty &
everything was gummed up, nothing could move freely
at all. Just 1 more job to cross off the list.
Thanks for the tips,

Cheers Jeff
rover money pit on mogs !!!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest