Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fender Flares

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

fender Flares

Post by grimbo »

Just been having a cruise through this Icelandic 4x4 site and there is a page with a whole list of flare manufacturers in Iceland. yes i know its a bit far away but they do make a huge range of fibreglass flares to cover some pretty large tyres. In thhis day and age with it harder and harder to keep our cars legal these might be of use to someone

http://www.4x4offroads.com/truck-fender-flare.html
Ransom note = demand + collage
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

CJ Burns Esq wrote:Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
which is not road worthy as a flare has to be structural in nature
Ransom note = demand + collage
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

grimbo wrote:
CJ Burns Esq wrote:Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
which is not road worthy as a flare has to be structural in nature
is that true????
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Good find Grimbo,
Was worth it just for this county thing :shock: FATISTHAT !
You do not have the required permissions to view the files attached to this post.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

mickyd555 wrote:
grimbo wrote:
CJ Burns Esq wrote:Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
which is not road worthy as a flare has to be structural in nature
is that true????
when I got defected for a couple of things one of them was my flares. I had polyurethane sheet covering my tyres. I was told that they had to be changed to a more structural nature as one of the roles a flare had to perform was it had to be able to deflect a pedestrian from the moving wheels
Ransom note = demand + collage
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

SHEDGUY tried to import some flairs (think it was that mob) from them and they wouldnt export for his troopy on 36x13 on 10's Swampers..
Top
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

my shorty with 11.5 x 33" 's didnt pass without flares, but cheap ass 'non-structrual' rubber flares passed - and they also passed a random RWC stop as well. I'm in vic but
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

holy sheet did anyone see the gu patrol on 49 iroks


http://www.4x4offroads.com/49-inch-modi ... chevy.html

Image
www.overkill4x4.com
ph 94766137
Top
Posts: 116
Joined: Sat May 14, 2005 11:55 am
Location: Murrumba Downs, Queensland

Post by dazzsbuggy »

damn those tyres look huge
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

grimbo wrote:
mickyd555 wrote:
grimbo wrote:
CJ Burns Esq wrote:Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
which is not road worthy as a flare has to be structural in nature
is that true????
when I got defected for a couple of things one of them was my flares. I had polyurethane sheet covering my tyres. I was told that they had to be changed to a more structural nature as one of the roles a flare had to perform was it had to be able to deflect a pedestrian from the moving wheels
Have you checked out the edging. I reckon I could bend my guard if I hit the edging hard enough and it wouldn't flex. If you wanna pay for a guard and paint you are welcome to prove me wrong :D :D
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

doesnt ARB sell something similar to the "garden edge" flare...........they look a bit nicer (i prefer the garden edge) but arnt they the same sort of contruction??????
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

CJ Burns Esq wrote:Go to Bunnings and purchase the plastic weed edging. costs about$5 for 10 metres.
actually it costs $27.50 but still cheap for 4 flares! did it today and looks prety cool
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 81
Joined: Fri Aug 13, 2004 9:42 am
Location: Canberra

Post by P_Byrne »

Queensland has a rule that is something like "the edge of any material (for flares) has to have a 5mm diameter radius", so that it wont cut pedestrians or similar
90 WT Tin Top - Stock noisemaker and gears :(
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

bunnings flares

I agree, they would tear the guards off before they gave in.

christover
You do not have the required permissions to view the files attached to this post.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

I agree as well.

My guards bend far more than the garden edging....

Dave.
Land Rover Discovery - GQ conversion underway
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

P_Byrne wrote:Queensland has a rule that is something like "the edge of any material (for flares) has to have a 5mm diameter radius", so that it wont cut pedestrians or similar
I also thought that was the go...
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Think you'd find most states have a similar rule. That's be the reason why the truck wheels have that turned over lip.
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

yeh but truck wheels also have pertuding wheel nuts that would destroy the side of another vehicle let alone a pedestrian!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

christover1 wrote:bunnings flares

I agree, they would tear the guards off before they gave in.

christover
Damn that colour is ugly :finger: :finger:
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

mickyd555 wrote:doesnt ARB sell something similar to the "garden edge" flare...........they look a bit nicer (i prefer the garden edge) but arnt they the same sort of contruction??????
Yeah they are made from rubber.

This is the first I have ever heard of a flare supposed to be able to "deflect a pedestrian", I honestly don't think it is true.

Arn't the flares are there to cover the tyres and attempt to stop rocks from flicking up into other cars?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

adam.s wrote:This is the first I have ever heard of a flare supposed to be able to "deflect a pedestrian", I honestly don't think it is true.

Arn't the flares are there to cover the tyres and attempt to stop rocks from flicking up into other cars?
covering the tires also stop people gettin wiped BY the tires.. another reason container Skel trailers were forced to put chain along the sides, to stop people falling into the space and getting hurt (dont worry about the fact that theres a 20ton container on top !

It wouldnt really suprise me if it was true - think of some of the other fucked up laws out there.
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

high n mighty wrote:
christover1 wrote:bunnings flares

I agree, they would tear the guards off before they gave in.

christover
Damn that colour is ugly :finger: :finger:
yeah, but so am I, so it matches well :D

chrustover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

christover1 wrote:
high n mighty wrote:
christover1 wrote:bunnings flares

I agree, they would tear the guards off before they gave in.

christover
Damn that colour is ugly :finger: :finger:
yeah, but so am I, so it matches well :D

chrustover
I like ya sign off CRUSTY :finger: :finger: :D :D :D
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

Your right people...the bunnings flares do crush the guards before they are damged themselves as seen on my once pristine front passenger guard :armsup:
You do not have the required permissions to view the files attached to this post.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

adam.s wrote:
mickyd555 wrote:doesnt ARB sell something similar to the "garden edge" flare...........they look a bit nicer (i prefer the garden edge) but arnt they the same sort of contruction??????
Yeah they are made from rubber.

This is the first I have ever heard of a flare supposed to be able to "deflect a pedestrian", I honestly don't think it is true.

Arn't the flares are there to cover the tyres and attempt to stop rocks from flicking up into other cars?
If you saw my car you would realise how strict we were on making sure everything was as road worthy as possible. The flares were an obvious one that was easilt fixed with some new flares. You will be surprised at what is and isn't road worthhyrequirements. Just because people get away with stuff doesn't mean anything. I have passed rwc and roadside inspections before with my previous flares.
Ransom note = demand + collage
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

mickyd555 wrote:doesnt ARB sell something similar to the "garden edge" flare...........they look a bit nicer (i prefer the garden edge) but arnt they the same sort of contruction??????
yes but they are inly about an inch wide which means there is a lot more strength in the rolled rubber edge and the steel insert than a 5-6" flare required to cover a seriously big tyre that people are starting to use.
Ransom note = demand + collage
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Apart from objects (stones sand mud ect )
The flares are required to Diffuse Spray , Take a look at a GP on a wet day they cant see thru the spray .
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

This 80 series on 44's in in NSW and got the flares and hydro steer kit sent out from Toyota Iceland.

http://www.4x4offroads.com/toyota-land- ... ralia.html
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

Hekta wrote:This 80 series on 44's in in NSW and got the flares and hydro steer kit sent out from Toyota Iceland.

http://www.4x4offroads.com/toyota-land- ... ralia.html
thats actually the promo truck from Fourby's here in BrizVegas
indubitably
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 170 guests