Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Driveshaft help please

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 52
Joined: Sun Apr 25, 2004 7:01 pm
Location: tamworth nsw

Driveshaft help please

Post by nischev »

Got my new front driveshaft today and when i dummy fitted it to see how much it needs to be shortened the double cardin joint is very close to my transmission. Just wondering if anyone can see a problem with running the driveshaft upside down so that the cardin joint is at the diff end.
Just thought I would find out as I cant decide whether to leave the cardin joint on the shaft or remove it and sell it. The shaft will be about 800mm long and rear shaft is shorter and dont have any probs without cardin joint.
madness
Top
Posts: 221
Joined: Mon Sep 06, 2004 3:29 pm
Location: Sydney

Re: Driveshaft help please

Post by muzza_fattire »

nischev wrote:Just wondering if anyone can see a problem with running the driveshaft upside down so that the cardin joint is at the diff end.
Wont work. For this setup the the output shaft of the transfer case will need to be inline with the drive shaft, which means you will need to tilt your front diff on some crazy angle.
I dont think you would need one on the front if you dont have one on the back. Just line up the angle of the transfer output to the pinion shaft on the diff. The driveshaft may be reaching the limit of it's operating angle and shudder a bit, but you will only really notice this at high speed.
What car is it on? Will you be doing high speed work in 4x4?
*****************
'88 GQ SWB TD42
Top
Posts: 454
Joined: Sat Oct 09, 2004 8:26 am
Location: Brissy

Post by The Big Green Meany »

Ok, I had a shorty with 7' springs and 2' body lift , Didnt need a double cardin joint in the front a standard one does the job, However you do need to run 1 in the rear.
Top
Posts: 52
Joined: Sun Apr 25, 2004 7:01 pm
Location: tamworth nsw

Post by nischev »

It is on a MQ swb. It is only lifted maybe 2" plus 2" bodylift and Im not planning on lifting it anymore than that. It doesnt get used at high speed in 4wd.
Might have to look at getting another end for the shaft and get rid of the cardin joint.
Thanks for the help.
madness
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

nischev wrote:It is on a MQ swb. It is only lifted maybe 2" plus 2" bodylift and Im not planning on lifting it anymore than that. It doesnt get used at high speed in 4wd.
Might have to look at getting another end for the shaft and get rid of the cardin joint.
Thanks for the help.
if u can find a shaft without a double cardon that u can modify to length..... the double cardon is not needed.

just get rid of it and get a non double cardon and get it to length. will work a treat.

i have plenty here if ya want one to give me the colapesed measurement minimum u want ill have something, send me a pm if ur interested.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 112 guests