Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Speedo correction

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Speedo correction

Post by AFeral »

Finally put some 35s on my patrol :) :)
Only problem speedo seems a bit ????? all too shit.
Is there any way to sort this out?
To do 80 km an hour what speed does the speedo need to be at. Whats the go for 60 and 100 too.
Thanks.
Posts: 76
Joined: Sat Jun 04, 2005 2:36 pm
Location: Black Rock

Post by JontyG »

you can either get a speedo correction device from Jaycar, or Marks 4wd
(http://www.marks4wd.com/speedo-correction.html)

or, you can change the diff ratios...check out the following link to estimate the ratios that will bring it back to standard:

http://members.optusnet.com.au/~zerosin/gearcalc.html

FYI, i have a 4.8 GU, with 3.5:1 diff ratios and 315's, and my speedo is approx. 15% out. I am changing the diff ratios, cause it will improve the driavability offroad, and bring the speedo back to standard.

the seedo correction device (as sold by MARK'S) is good if you are switching btwn different size tyres on a regular basis.

Hope this helps,
Jonty
GU III 4.8 Auto
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

apparently fitting 35's puts speedo out by 16% so dash reads 100 your really doing 116
Jonty just beat me to it
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Didn't Bazzle once say something about just changing the cog in the speedo?
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

speedo

Post by china »

i got 36inch pedes on mine an is only 10% out, unless the GPS shows an incorrect speed??
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

blkmav wrote:Didn't Bazzle once say something about just changing the cog in the speedo?
Yep can buy the gears for bugger all from Nissan and supposedly they are easy to change. I never worrid about it as the 33's roadies where close enough and when the 35's are on I always use teh GPS as a speedo.
THOUGHT FOR THE DAY....
Posts: 260
Joined: Wed May 05, 2004 5:29 pm
Location: northern suburbs vic

Post by holeyhardtop »

http://www.outerlimits4x4.com/PHP_Modul ... correction

the above link will give you all the info required. i changed mine when i fitted 33"tyres to my gq. you'll need a small pin punch{about 1/16" dia} to knock out the retaining pin on the gear, tis a bit fiddly but nothing a person with a brain and mild dexterity can't easily achieve. can't remember the cost for the gear but $40ish rings a bell, either way it's a s#it load cheaper than a fine down here in the revenue state.
Posts: 12
Joined: Fri Oct 08, 2004 9:39 pm
Location: narresouth

Post by vcharter »

all ya need to do is adjust tuning pod in speedo head itself ,remove outer cover of dash cluster and drill small hole inline of adjustor and adjust to suit,best way of getting it accurate is gps
Posts: 27
Joined: Tue Sep 21, 2004 11:00 pm
Location: Sydney/ Gold Coast

Post by fatcatsam »

so, if i have gone from 265/70r 16lt to 33" MTR's, what percentage has my speedo gone out?
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

I just drive with GPS on dash now.. its easier. arseholes to the bacon
Posts: 76
Joined: Sat Jun 04, 2005 2:36 pm
Location: Black Rock

Post by JontyG »

fatcatsam, checkout the following link, as mentioned in my first reply:

http://members.optusnet.com.au/~zerosin/gearcalc.html
GU III 4.8 Auto
Posts: 721
Joined: Sun Apr 24, 2005 3:01 pm
Location: on top of a large pile of rocks

Post by AFeral »

Thanks for the help think i will go the hole and the screw driver option. Will be changing the diff ratios before long with any luck. So i can change it back after.
Posts: 27
Joined: Tue Sep 21, 2004 11:00 pm
Location: Sydney/ Gold Coast

Post by fatcatsam »

JontyG: Thanks, missed it before
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests