Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vitara Question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 576
Joined: Wed Jun 02, 2004 8:17 pm
Location: Adelaide, South Aus

Vitara Question

Post by Dangerous Dave »

Vitara Question


Do Vitara's have a solid front end? ie. not IFS. If so does anyone know the track width of them on the front. Failing this what is the track width of a Sierra Front end.


Thanks in advance.


Dave.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Re: Vitara Question

Post by Beastmavster »

Dangerous Dave wrote:Vitara Question


Do Vitara's have a solid front end? ie. not IFS. If so does anyone know the track width of them on the front. Failing this what is the track width of a Sierra Front end.


Thanks in advance.


Dave.
Vitaras have IFS. No Solid axle variants exist anywhere in the world (except those people have made).

Sierra front end swaps have been done before, but a sierra front end is a lot narrowe.

A Jimny front axle might be better, or coily sierra which are both wider than a widetrack.

Bundera seems the most sensible swap since coils and all line up.
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

should clarify here, daves looking for a donor axle for his ferrozza
Spit my last breath
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Ok. Then he's looking in the wrong spot.

Why isnt he looking at a early rocky?
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

he was thinking zook front end because.... i don't know... but there seems to be a fair bit more aftermarket support for the zooks, plus newer running gear (if a vit or coily sierra worked)
Spit my last breath
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Make sure ya look at the ratios F + R.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

With ferozas being 5.29:1 the only similar gearing he'll find is available in toyota diffs.

Rocky diffs may be able to take R&P from feroza I dont know.

If not, then he'd need to swap both (couldnt run lux diffs and have 5 stud and 6 stud).

Considering the weakness of the feroza bits then I think lux is the go. Also about the only diff you can get easy that can get ratios that short.
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

Bundera...

Post by Impulsive »

Just outa curiosity then, what ratio are the Bundera diffs?

If one were to swap the front, would it necessitate a rear swap also (due to the ratios being different)?

Adam
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Re: Bundera...

Post by nicbeer »

Impulsive wrote:Just outa curiosity then, what ratio are the Bundera diffs?

If one were to swap the front, would it necessitate a rear swap also (due to the ratios being different)?

Adam
If the ratios are different then yes. if not then you may get out of it with only the front. Remember the 5 stud / 6 stud differences.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Bundera are 4.88 but there are 5.12 toyota diffs available.

Having said that, it'd only be a temporary solution on that gearing... stock gearing pulling 31"+ tyres sucks....
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests