Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steering wheel for a Fourtrack (European Rocky)?

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 18
Joined: Tue Jun 21, 2005 6:45 pm

Steering wheel for a Fourtrack (European Rocky)?

Post by SpaceFrog »

Someone knows if i can fit a steering wheel from another Daihatsu model in my 1992 Foutrack?

Like a Feroza (US Rocky, Sportrack...) or a Terios steering wheel...

Regards.
www.hypercore.org
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Not too sure. I have just checked the Boss kit listing for Saas aftermarket wheels. It seems the Rocky(Fourtrak) wheels are different to the Feroza(Sportrak) wheels.
Mud makes excellent toothpaste.
Top
Posts: 18
Joined: Tue Jun 21, 2005 6:45 pm

Post by SpaceFrog »

:cry: Can you recommend me some sites to find steering wheels for my 92 Fourtrack? I want to change to a another one a bit smaller.

Regards.
www.hypercore.org
Top
Posts: 145
Joined: Mon Jul 11, 2005 6:32 am
Location: Canberra Australia

Post by RobF300 »

ebay - and be patient the wheel you want will show up, be careful there are a lot of rip off (fakes) and shonkey wheels. I ended up with a genuine momo brand new for $218 AUD to the door...
You do not have the required permissions to view the files attached to this post.
Fear the mighty Daihatsu!
Top
Posts: 410
Joined: Tue Jul 29, 2003 8:43 am
Location: Colorado Springs, Colorado

Post by Toyhatsu »

RobF300 wrote:genuine momo brand new for $218 AUD to the door..
Geez_O_Petey...that's how much those Momo's cost? Mike H. sent me his and a Momo shift knob for shipping some camera equipment to him. I think that I owe him big time :shock:
You do not have the required permissions to view the files attached to this post.
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

If its any use, the Saas boss kit number is 155 for a Rocky (Fourtrak). However, whilst they say it is long, its not long enough to clear the nut and steering shaft. I ended up making a spacer that fits between the wheel and the boss. I needed about 5mm clearance.

http://groups.msn.com/AussieDaihatsuRoc ... PhotoID=66
Mud makes excellent toothpaste.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Toyhatsu wrote:
RobF300 wrote:genuine momo brand new for $218 AUD to the door..
Geez_O_Petey...that's how much those Momo's cost? Mike H. sent me his and a Momo shift knob for shipping some camera equipment to him. I think that I owe him big time :shock:
That's cheap for a Momo. They vary a lot (depending on the model) but over $500 isn't uncommon.
David
Top
Posts: 18
Joined: Tue Jun 21, 2005 6:45 pm

Post by SpaceFrog »

BundyRumandCoke wrote:If its any use, the Saas boss kit number is 155 for a Rocky (Fourtrak). However, whilst they say it is long, its not long enough to clear the nut and steering shaft. I ended up making a spacer that fits between the wheel and the boss. I needed about 5mm clearance.

http://groups.msn.com/AussieDaihatsuRoc ... PhotoID=66
How difficult is to make this spacer?

I'm also interested in the seats replacement that you make. Please look this post:
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=50553

Regards.
www.hypercore.org
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 19 guests