Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Buying a 60 Series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 60
Joined: Fri Sep 24, 2004 12:41 am
Location: Gold Coast, Sunny Qld

Buying a 60 Series

Post by D_Web »

I am looking at purchasing a vehicle (my first) soonish, and am having a hard time deciding what to get. Initially I was thinking about a SWB Patrol/Mav, but a good diesel is very hard to find & expensive, and I'm now seriously considering a clean 60 with a 12HT.

The other options are an early model 80, early model GQ or perhaps even a Bundera. Only requirements are is that it has to be a manual diesel (coils would be nice). My main concerns with the 60 is the leaf springs and they seem to have a fair bit of overhang in the back. However, it'd make a far better touring vehicle than a SWB (I'd be doing club trips and touring, so it'd have to cope with interesting track work too).

So, 60 series oweners - how do you find your trucks offroad? Is it possible ge t a decent amount of travel without doing crazy modifications? I've always driven off-road in dads 80 series (1HD-T, 70mm lift, 285/75 BF A/T's and locked up), so it'd probably be a bit of change...

Any other suggestions/comments?
Last edited by D_Web on Fri Jul 15, 2005 5:12 pm, edited 1 time in total.
Posts: 71
Joined: Tue Feb 15, 2005 1:41 pm
Location: Canberra

Post by Diesel 60 »

I get excellent flex in my 60 and it just has aftermarket springs and OME shocks. The rear overhang is an issue...60s drag their bums everywhere, but it's only the tow bar so who cares?

I have lockers in my 60 and the only thing I'd like to improve it off road would be 33in mud tyres instead of the current 31in A/Ts.

Yes. coils would be nice and GQs and 80s have more modern, comfy interiors, but for good value, no nonsense, realiable capability the 60's are hard to beat. If you can get one with a good 12ht turbo diesel, all the better.

If you can get a good, clean 60 for reasonable money...get it and spend a little bit getting it thoroughly sorted.

Decent flex
Image

Handles the rough stuff
Image

[/img]
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Ouch!

You need sliders. Make some good ones, then send me the plans!

BTW, how are your lockers?
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 60
Joined: Fri Sep 24, 2004 12:41 am
Location: Gold Coast, Sunny Qld

Post by D_Web »

Nothing wrong there at all, for only working the suspension, it's more than I was expecting.

Which motor are you running Diesel 60?

(Yes, your nick finally cliked :P)
Last edited by D_Web on Mon Jul 18, 2005 9:25 am, edited 2 times in total.
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Front wheel tucked up nicely into guard.

Image
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 71
Joined: Tue Feb 15, 2005 1:41 pm
Location: Canberra

Post by Diesel 60 »

Mine's a diesel, slow but excellent off road. I'll eventually get sliders I suppose, but the side steps do the job admirably at the moment :lol: and I need to sort out the leaking PS pump, leaking radiator and dead battery first. :roll:

The lockers are fantastic, they really do make a big difference in rough conditions. Being entirely mechanical (cable operated) they have bugger all that can go wrong with them. Biggest downside is the knob that actuates the front locker is under the driver's seat facing forward, so I either have to get out of the car to pull it out or use a big shifter as a lever.
Posts: 1083
Joined: Tue Apr 26, 2005 12:08 pm
Location: Toowoomba

My sixty kicks arse

Post by Guy From Nowhere »

My lil monster is still on standard leaf with som ironman up front and old man emu down back given the ride some optimum travel on the stocks. I'm about to do a SPOA to give the ultimate in leaf flex as the ruff stuff is better off done that way (from my breakage experience). The SPOA if done your self is minimal in cost (shocks, ubolts, extended brake line, new mounts etc) and delivers big time...as my maters sixty has shown me.

I want to put a locker at the rear and a slippery diff at the front...any suggestions (budget bound too).

SANGA
[quote="MissForbyNooB"] I've played with you AND your missus. [/quote]
Posts: 60
Joined: Fri Sep 24, 2004 12:41 am
Location: Gold Coast, Sunny Qld

Re: My sixty kicks arse

Post by D_Web »

Guy From Nowhere wrote:My lil monster is still on standard leaf with som ironman up front and old man emu down back given the ride some optimum travel on the stocks. I'm about to do a SPOA to give the ultimate in leaf flex as the ruff stuff is better off done that way (from my breakage experience). The SPOA if done your self is minimal in cost (shocks, ubolts, extended brake line, new mounts etc) and delivers big time...as my maters sixty has shown me.

I want to put a locker at the rear and a slippery diff at the front...any suggestions (budget bound too).

SANGA
I thought SPOA's (I take it that is SPring Over Axle) were illegal?
Posts: 107
Joined: Tue Jul 05, 2005 9:06 pm
Location: BrisVegas

Post by juscruisin »

D_Web,

I have owned mine for just over 12 months (first 4wd). It's an '88 model with 2H and after-market turbo. I have been pretty happy with it's offroad performance - seems to go just about anywhere my mate's Rovers go.

It currently sits on ageing 2" lifted springs and while the articulation isn't anything to write home about, it seems to do the job.

I think it really depends on what you want out of a 4wd. The old diesel 60's are not exactly the most comfortable thing to drive, are pretty heavy (in weight & on fuel - specially with the turbo and 35" tyres). You know you're driving a truck, not a sports car.

But, if you just want to get offroad, they're solid, fairly reliable (given the age) and relatively simple mechanically. The size also comes in handy for taking all that camping gear you won't use when you get where you're going, too!

Mine does all I need it to. My Rover-driving mates have been quite impressed with how well it goes (not trying to start an argument here).
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Post by hj 45 »

springovers are illegal in QLD, legal elsewhere tho............. :roll:
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

My 60

Post by G_loomis »

I have a 83 HJ60. Currently running a 2" suspension lift (OME) and 2" body lift. 35" Wranglers fill the wheel arches nicely.

At the moment the flex is nothing to be sneezed at four a leaf sprung truck...but things could always be better.

As for the rear overhang...I do tend to smack the towbar a bit...but saves smacking the rear sill.
You do not have the required permissions to view the files attached to this post.
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

:-)

Post by G_loomis »

:lol:
You do not have the required permissions to view the files attached to this post.
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 510
Joined: Wed Sep 15, 2004 7:07 pm
Location: Pheasant Creek

Post by HEY CHARGER »

Sixtys are a great truck very reliable and good enough in the bush , a spring over does help a lot for any leaf sprung vehicle , i say go the Sixty.

Heres a few pics of mine getting flexed after a i finished the spring over conversion , and a bit of a paint job ,
i roughly got the front left up about 1000mm , which i reckon is pretty good for the old girl.
You do not have the required permissions to view the files attached to this post.
Posts: 71
Joined: Tue Feb 15, 2005 1:41 pm
Location: Canberra

Post by Diesel 60 »

D_Web wrote:Nothing wrong there at all, for only working the suspension, it's more than I was expecting.

Which motor are you running Diesel 60?

(Yes, your nick finally cliked :P)
I've got a 2h, slow but reliable. Stick it in low 1st and it'll climb anything. :)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests