Sunraysia wheel nuts?

Post by **Nev** » Wed Jul 20, 2005 9:22 pm

The zook i just bought has 15x7 sunnies on it and i think it is running the original suzuki wheel nuts..is this a problem long or short term and do sunraysias come with their own wheel nuts? Any info and thoughts from people in the know or running the same setup would be appreciated. cheers.

Post by **nicbeer** » Wed Jul 20, 2005 9:31 pm

I am running the original wheel nuts.

i have been told and still trying to find some cheap ones. that the nissan patrol wheel nuts are the same thread and pitch to the zook ones but are 21mm big and not the zook 19mm ones. they would be better for seating inside the rim holes.

cheers

Post by **alien** » Wed Jul 20, 2005 10:11 pm

theres a store somewhere in perth my boss went to once that stock nothing but nuts and bolts... they can match any threaded nut to a bolt etc... even order some in.

im sure if you look up hardware stores specialising in bolts on yellowpages you'd find the place.

EDIT: see if this works: http://www.yellowpages.com.au/search/po ... Clue=perth

Post by **derelict_frog** » Thu Jul 21, 2005 4:26 pm

Is there anything wrong with running the original wheel nuts?

Post by **nicbeer** » Thu Jul 21, 2005 5:01 pm

Nuthin i think. but sometimes i have noticed they bite into the rim and not seat into it when doing them up

cheers

Post by **Nev** » Thu Jul 21, 2005 6:05 pm

thanks guys..yeh i don't think there is anything wrong with running the originals its just they look rather small for a more solid and offset wheel and also the seating issue. the sunraysias are raised up in the middle near the wheel nuts holes and the original rims are flat in the centre...or vice versa..can't remember which way around they are

Outer Limits 4x4 Board

Sunraysia wheel nuts?

Sunraysia wheel nuts?

Who is online