Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How loud is a lockright?
How loud is a lockright?
Finally got mine installed in the rear and did its first road run to work this morning Probably not the best idea in hindsight
They seem pretty loud though when cornering.... how loud is everyone elses
Mine is clearly audible from outside the car and sounds like the rear diff is stuffed Not a bad noise just the proper click/ clunk but yeah pretty loud. Goes fine in a straight line. Is this normal
They seem pretty loud though when cornering.... how loud is everyone elses
Mine is clearly audible from outside the car and sounds like the rear diff is stuffed Not a bad noise just the proper click/ clunk but yeah pretty loud. Goes fine in a straight line. Is this normal
lockright locker
Yes they are loud and will scare the shit out of you sometimes. On road, try not to use hard throttle when cornering. I also use 85-140 diff oil which reduced the clunking. They are awesome off road though.
Maybe PK means when the clutch is dissengaged?
good thread for when mine is in the front of the zook. Then again at least i can unlock the hubs for the front but having a welded rear as well = fun
cheers
good thread for when mine is in the front of the zook. Then again at least i can unlock the hubs for the front but having a welded rear as well = fun
cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
-Mick- wrote:stumped wrote:wait til it wears in a bit and ya get more backlash and some really scary sounding bangs and cracks
can't wait for that one
I'm driving up to landcruiser park tonight and I reckon the drive through the mountains will be 30 mins of non stop clunking There's no straight sections
there's a section of road near hornsby/sydney that goes thru galston gorge... very tight and windy with hairpins that only one car can usually go around at a time..... only way to drive thru with the locker on the uphill hairpins is with some serious chirping if i had to drive thru there any more often than i do now, i'd be rotating my tyres a lot more often!!!
___,,,,_('o')_,,,,____
part of the newy conspiracy...
part of the newy conspiracy...
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
I imported a detroit ez-locker (same as lockright) from the states from http://www.roadlessgear.com. Worked out at under $400 from ordering to in the diff, that price is including diff oil, sealant etc. Delivery was quick, and customer service was top notch. Spoke to a guy called Figmo over there. I installed my locker myself, and found it easy, but i am a a mechanic by trade. If you are pretty mechanicaly talented it might be worth doing yaself, but if your not sure get it installed profesionaly and save and potential heartache later on. Round here places charge bout $100 to install one, thats if you pull the diff yourself and drop it off. If your diff is a bit dodgy take the oppertunity to get it sorted at the same time.
Layto....
With ez-locker, and mtr's at 8psi, makes for great screechys in enclosed car parks, instand attention
Layto....
With ez-locker, and mtr's at 8psi, makes for great screechys in enclosed car parks, instand attention
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Mine always clicked loudly while cornering but never 'banged'.
According to basketcase it banged so loudly when he drove it, he shat himself and thought the diff had shattered into a 10000 pieces but has never does this to me.
As antt said, putting clutch in around corners is always a good thing (especially at roundabouts ), but his locker was deadlier than mine.
Nothing like bunny hopping the Vit onto footpaths...aye antt
According to basketcase it banged so loudly when he drove it, he shat himself and thought the diff had shattered into a 10000 pieces but has never does this to me.
As antt said, putting clutch in around corners is always a good thing (especially at roundabouts ), but his locker was deadlier than mine.
Nothing like bunny hopping the Vit onto footpaths...aye antt
Zookified wrote:So are lockrights legal in queensland?
yes they are. they do not stay locked when turning (if your foot is not flat to the floor)
they are known as a unlocker.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
When i did mine i just paid over the net through credit card. The savings are awesome compared to Aust prices, though warranty is a bit of a problem,
Layto.....
Layto.....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
yeah 420 au, payed with credit card over the phone.
They tell me a price in US $, punch it in currency converter on the net = AU $, then don't forget to add customs. When mine arrive in Sydney it was $127 in customs. Total including customs was about $850.
Fitted new rears and RUF today, you could say the flex is a bit better, considering I had none before.
They tell me a price in US $, punch it in currency converter on the net = AU $, then don't forget to add customs. When mine arrive in Sydney it was $127 in customs. Total including customs was about $850.
Fitted new rears and RUF today, you could say the flex is a bit better, considering I had none before.
Who is online
Users browsing this forum: No registered users and 0 guests