p/steer pulleys

Post by **isuki** » Thu Jul 21, 2005 10:15 pm

Just a quick q for those in the know ?

I've just fitted up p/s pump and brackets to a G161 (i know) and was wondering if the jack crank pulleys were multiple singles bolted or a one peice pulley (2v -3v).

The reason I ask is the single pulley on mine has 2 12mm bolts and the centre bolt , but also has a dowel pin as well 90deg to the smaller opposed bolts.

This is in a suzuki but i'm using isuzu mtr/box to give it some cred.
Thanks in advance
Craig

Post by **pig75** » Fri Jul 22, 2005 5:26 pm

I assume you mean a G161 not a G160 if you do there are 1V, 2V&3v setups for that motor

Post by **isuki** » Fri Jul 22, 2005 9:02 pm

OOps ..Have fixed it up ta for that Pig75, my brain and hands don't talk sometimes

And yes i have the single pulley at pressent but am trying to locate the additional pulley to bolt up for p/s. So i will have 1belt for w/p & alt then another off crank just for p/s pump and Idler.

From my rough measure it should be about 35mm from mount side to centre of v pulley.

Post by **pig75** » Sat Jul 23, 2005 8:33 am

go to the wreckers the TG Gemini has a 2 belt standard one for alt the other for this air injection pump you might even find a air con Gemini that has a 3 belt pulley

Post by **isuki** » Sun Jul 24, 2005 6:16 pm

Thanks for that will check wreckers through the week, if not will look at making one to suit .

Info here has been a real help
Cheers Craig

Outer Limits 4x4 Board

p/steer pulleys

p/steer pulleys

Who is online