Probably a silly question but not covered anywhere I can find in the tech articles - how much camber change is there when you wind up the torsion bars? Do you need to to a full wheel alignment ie replace shims etc it you wind up the torsion bars?
Thanks,
Noel
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front end lift - camber changes?
Moderator: Tiny
I found that when I did my torsion bars there was a significant change in the steering and that it would pull hard to the left. I took it to jax and they didnt realisee the shims for the camber were inside the engine bay untill I told them they were there.
From memory the total cost of the alignment including shims was about $60.
From memory the total cost of the alignment including shims was about $60.
On boooooost!!
Who is online
Users browsing this forum: No registered users and 0 guests