Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4age ruf hilux fronts on rear
4age ruf hilux fronts on rear
i was wondering if i could use a rear driveshaft on the front on my lwb since i am putting a 4age in which means i have to move the t/case back and i am putting rears up front which will move the front diff forward would this make enough room to run a rear shaft up front
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
my guess is you would just have to see,
too many variables, how far you are moving your tcase back, how far you are moving your front diff forward, how long LWB rear driveshafts are normally..
my guess you will need longer then standard.
too many variables, how far you are moving your tcase back, how far you are moving your front diff forward, how long LWB rear driveshafts are normally..
my guess you will need longer then standard.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Who is online
Users browsing this forum: No registered users and 1 guest