Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

idler arm needed brisbane

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

idler arm needed brisbane

Post by 4x4xmore »

i am in the need for a idler arm any one out there got a cheap one they wanna sell me if so pm me thanks
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 669
Joined: Wed Sep 17, 2003 11:29 am
Location: Sydney

Post by Croz »

I wouldnt bother with a second hand idler, its likely to be clapped out as well. I tried to find one in sydney and gave up after looking at every wreckers to see that they were crap.

I found Daicare in sydney were quites cheap compared to all the other dealers ($40 odd cheaper than chatswood) so you could try them. They dont mind posting either, i got my clutch $110 cheaper from them and they charged $11 to get it to me, 3 hours later!

www.daicare.com.au
On boooooost!!
Posts: 86
Joined: Thu Jun 03, 2004 1:20 pm
Location: Beenleigh, QLD

Post by BenDover »

Give All About Steering And Suspension a call in Moss st Slacks Creek. I got my Idler and Pitman arms replaced by them for about $300 all up.
93 Feroza SXP II
2" EFS Suspension Lift
30" Maxis AT Tyres
15x7 CSA Magnum Rims
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

BenDover wrote:Give All About Steering And Suspension a call in Moss st Slacks Creek. I got my Idler and Pitman arms replaced by them for about $300 all up.
need more details please. how long ago? were they new or s/h parts or reco parts. Igave them a call today and they said they couldnt get them, so any more info would be good
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 258
Joined: Wed Nov 17, 2004 7:39 am
Location: West Oz.

Post by tufferoza »

i just recently got one and a pittman arm for $85 each from Diahatsu Auto Recyclers in brissie. wasnt the best, though it has made the wheel wobble better than it was.
i'll deffinatly save for a new one through toyota next time.
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
Posts: 86
Joined: Thu Jun 03, 2004 1:20 pm
Location: Beenleigh, QLD

Post by BenDover »

I got mine done about 2 months ago. I can't see why they wouldn't be able to get them??? When I got mine done he said availability wasn't a problem and I only needed to let him know a day in advance. You could mention that a guy with a white Feroza got his done and put you onto them.

Try On Track 4wd in Moss St too. The quality of workmanship is far better there but the $$$ goes with it too.
93 Feroza SXP II
2" EFS Suspension Lift
30" Maxis AT Tyres
15x7 CSA Magnum Rims
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

BenDover wrote:I got mine done about 2 months ago. I can't see why they wouldn't be able to get them??? When I got mine done he said availability wasn't a problem and I only needed to let him know a day in advance. You could mention that a guy with a white Feroza got his done and put you onto them.

Try On Track 4wd in Moss St too. The quality of workmanship is far better there but the $$$ goes with it too.
got on to them today and was told no way can they replace them for that much as there around $200 each but if they werent to far gone they could polyfill them for around $85 ea so that would have been around $300 inc labour.

so if you got new ones for three hundred your a lucky bugger
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

tufferoza wrote:i just recently got one and a pittman arm for $85 each from Diahatsu Auto Recyclers in brissie. wasnt the best, though it has made the wheel wobble better than it was.
i'll deffinatly save for a new one through toyota next time.
gave them a call and there $85 ea but salisbury wrecking (2mins further down the road) have them for $45 ea so keep them in mind. Will have to put up with these for now till i get cash to buy new ones
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 86
Joined: Thu Jun 03, 2004 1:20 pm
Location: Beenleigh, QLD

Post by BenDover »

Well they quoted on new ones and told me they were so they had better be! I can't believe they cost that much!

I have just checked previous bank statements and the actual price I paid which included a wheel alignment was $297. I cant see why they can't do it for the same price if I have proof they did it for me at that price!

Have you given On Track 4WD a call?
93 Feroza SXP II
2" EFS Suspension Lift
30" Maxis AT Tyres
15x7 CSA Magnum Rims
Posts: 258
Joined: Wed Nov 17, 2004 7:39 am
Location: West Oz.

Post by tufferoza »

ferozaman wrote:gave them a call and there $85 ea but salisbury wrecking (2mins further down the road) have them for $45 ea so keep them in mind. Will have to put up with these for now till i get cash to buy new ones
cheers, i'll have to try them next time i am looking for something. they much in the way of feroza stuff?
pics, dribble, turbo conversion.... click [url=http://www.cardomain.com/memberpage/657917/1]here.[/url]
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

tufferoza wrote:
ferozaman wrote:gave them a call and there $85 ea but salisbury wrecking (2mins further down the road) have them for $45 ea so keep them in mind. Will have to put up with these for now till i get cash to buy new ones
cheers, i'll have to try them next time i am looking for something. they much in the way of feroza stuff?
they have a few ferozas but what apack of dickheads they are. i got to the wreckers at 7:35 and told them what i was after and the told me i had to wait untill 8 when they actually start. Then 8 came, at around ten past 8 they came and told me sorry mate but we only sell the pitman arm with the steering box. man was i pissed :x :x :x stood there and exchanged a few more abrupt words and left with nothing. went to karl at daihatsu auto recyclers he was a lot dearer but at least he has good service and no waiting al bloody day for nothing. so my advice is to aviod them if possible
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests