Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

defected

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 84
Joined: Thu Jun 12, 2003 8:54 pm
Location: Cherryville South Australia

defected

Post by johnboy »

The hilux was defected on sunday for tyre 15mm outside the guards, not to fussed about that but he added a suspension deffect for the ifs being wound up WTF is with that not happy jan.


John
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Well you havnt told us much :?

What sort of vehicle?
How much top and bottom bump stop clearance?

May be he was correct..........?

Bazzle :roll:
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bazzle wrote:Well you havnt told us much :?

What sort of vehicle?
How much top and bottom bump stop clearance?

May be he was correct..........?

Bazzle :roll:

Also, is the camber on the wheels excessive because you have wound up the torsion bars?
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

Did he defect the suspension after a possible disagreement about the tyres?? Maybe he just went looking for something....
Top
Posts: 84
Joined: Thu Jun 12, 2003 8:54 pm
Location: Cherryville South Australia

Post by johnboy »

picked for tyres then started to be nosey picked that there was only about 1/4" of upper bump stop clearance.
Now it has to have a full inspection.

Its an ifs hilux.


John
Top
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

no big drama. just fit some flares then wind the bars back down for the inspection
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

hi-luxmadness wrote:no big drama. just fit some flares then wind the bars back down for the inspection
But then wouldn't he be sitting on the bump stop?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 19
Joined: Fri Feb 18, 2005 5:15 pm

Post by The Engineer »

Is it possible to buy replacement bump stops to bring the clearences back into legal range? I have heard of low profile ones for the bottom, but what about extended ones for the tops?
Also where can you buy the low profile ones? I would prefer not to cut them.

Cheers

Justin
2004 V6 Hilux
Airlockers 2 inch suspension lift 2 inch body lift
Top
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

DeWsE wrote:
hi-luxmadness wrote:no big drama. just fit some flares then wind the bars back down for the inspection
But then wouldn't he be sitting on the bump stop?
no the upper bumpstop will have more clearance
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

Not sure if there are limits to how much you can wind them but I had my Rodeo inspected yesterday and the inspector asked me if I had wound mine. However it turns out he was just curious as he had just wound his :cool:
Land Rover Discovery series 1 V8
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 20 guests