got me a new NISSAN NAVARA woohoo

[jeeperman]

as the title says, got me a new Nissan Navara, have to get my username changed now. Anyways, just wondering what is the eaiest way to remove the tray above the stereo to fit a UHF?? Is there any tricks or tips people have. Alternatively, where have ppl fitted thier UHF's other than in this spot?

[bogged]

you may have better luck on exploroz.com.au with that question, havent seen many Navara posts here

[blkmav]

you may have better luck on exploroz.com.au with that question, havent seen many Navara posts here

Bogged, that's a nice way of saying 'you should have bought a patrol'

[InSanE]

there are 2 screws on the facia surround around the radio just above the heater/aircon control's undo those remove the ash trays they just pull out and then the surround will unclip. Then 4 screws hold the radio bracket to the dash undo those and then there are 2 screws on each side of the tray and it comes out easy to do. Be sure not to unplug the radio because you will have to get a radio code if you do if you have any troubles just message me