Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring, please help the dumbass.

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Wiring, please help the dumbass.

Post by Zookified »

When the zuk is running, if I use right indicator the reverse lights flash and the tail light on the right dims. This is only when the lights are on, high or low beam.

Anyone know how to help?
Top
Posts: 47
Joined: Wed Apr 14, 2004 11:07 pm
Location: Barden Ridge (Menai), NSW

Post by mud13s »

sounds like a bad earth

try giving the light assemblies a good clean out to get rid of any moisture, mud, and general crud

Paul
Top
Posts: 160
Joined: Sat Feb 26, 2005 7:32 pm
Location: tasmania

Post by turbogu »

yeah sounds like a bad earth, find the earths for the tail lights and head lights and clean the connections, run some course sand paper over the body of the car and the connector it self and then put a small smear of clear silicone over them once there back on to seal off from any mud and water etc
Gu Ute td42t, dzltech turbo, front mount and aus4wd manifold, 18 x 10 rims and 36 15.5 mickey t's for bling
Top
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

Thanks fellas.

I'll give it a try.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests