Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series suspension bolt size

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 109
Joined: Mon Jun 14, 2004 5:28 pm
Location: Gippsland

80 series suspension bolt size

Post by Cliffy »

Just writing by prop. for the engineer, what size is the mounting bolts for the front suspension arms (diff end) and what size is the rear suspesnion mounting bolts for the arms. Just diameters. ;)
1990 FJ70, 1HZ turbo/inter, masterpiece in progress.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

If it helps, the front bolts are 22mm socket (that should mean 18mm shank) and 24mm socket on the rear (20mm shank)
Andrew
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Font panard and radius arms to diff housing are M16x1.5, Radius arm to chassis, all rear control arm's including rear panard are M18x1.5 bolt/thread size.


Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 109
Joined: Mon Jun 14, 2004 5:28 pm
Location: Gippsland

Post by Cliffy »

Thanks guys just what I wanted. :)
1990 FJ70, 1HZ turbo/inter, masterpiece in progress.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests