Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

brakes feel like cheese

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

brakes feel like cheese

Post by stormpatrol »

new master cyl new pads bled several times / no leaks just a low pedal and spongy feel HELP please any ideas stormpatrol :armsup:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

What model, what year, LWB/SWB?
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

u bled the master cylinder and the brake porportioning valve??
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

cheezy brakes

Post by stormpatrol »

97 GQ lwb 5" lift 2.8 td this problem has been evident for some time and its got me stuffed , tried all i know just thought the forum might give me some help before we go to the brake shop cheers stormpatrol :armsup:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

bleeding

Post by stormpatrol »

yes i have bled the prop valve at the rear and all wheels but not the master cyl do you bleed the master cyl seperate to the whole system regards stormpatrol :armsup:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 150
Joined: Wed Mar 10, 2004 7:02 am
Location: Newcastle

Post by CB0569 »

I would like some info on this to please as my brake pedal went straight to the floor today.Had to pull handbrake on and nearly pushed the pedal thru the firewall to stop.
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

master cyl

Post by stormpatrol »

this sounds like a easy one clamp off all the lines see if she goes to floor if so one new master cyl i thinks try that let me know cheers stormpatrol :armsup:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 239
Joined: Mon Dec 01, 2003 8:43 am
Location: Brissy southside

Post by Josh_GQ »

stormpatrol what size tyres are you running? also have you checked that your getting good vacum at the master cylinder
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

33/31

Post by stormpatrol »

running 31" on road 33" off road have not checked the vacum thanks stormpatrol
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Re: 33/31

Post by bilby »

stormpatrol wrote:running 31" on road 33" off road have not checked the vacum thanks stormpatrol
discs were machined too were they ?????????
just a little left of insanity :)
Top
Posts: 276
Joined: Sat Jul 16, 2005 1:41 pm
Location: Melton, VIC

Re: brakes feel like cheese

Post by eighty8 »

stormpatrol wrote:new master cyl new pads bled several times / no leaks just a low pedal and spongy feel HELP please any ideas stormpatrol :armsup:
check your caliper slides, they seize up and will give a spongy feel as the caliper flex's to push pad to disc. pays to clean and grease at pad changes. is it disc/disc or disc/drum? if drum check adjustment.
[url=http://www.patrol4x4.com/forum/showthread.php?t=27334]The Weekend Warrior[/url]
Top
Posts: 176
Joined: Thu Jul 15, 2004 4:13 pm
Location: Wodonga

Post by GutSquisher Media »

Just a thought did you buy the master cylinder pre-assembled or did you need to assemble it. If pre-assembled it sounds like the rubber boot has inverted, if you assemebled the master cylinder did you place a small amount of rubber grease behind the rubber cup if not its leaking down.
Top
Posts: 221
Joined: Mon Sep 06, 2004 3:29 pm
Location: Sydney

Post by muzza_fattire »

To bleed master cylinder:
Get a mate. Wear old clothes.
Fill resevoir with brake fluid.
One guy hold fingers over all the brake line outlets of the master cylinder and apply some pressure.
Other guy push the piston into the cylinder so it forces fluid out of the outlets.
Keep enough pressure on the outlets so that when the piston is released it sucks brake fluid into the cylinder from the resevoir, not air from the outlets.
Repeat until there is no air in cylinder. Top up resevoir when necessary.
Install on vacuum diaphram and hook up brake lines.
Bleed brake lines like normal.
*****************
'88 GQ SWB TD42
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Have the pads bedded in yet??

Will be spongy until they do.

Bazzle
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

on too something

Post by stormpatrol »

ok thanks going to check the slides sounds like a gooer cause when you put brakes on you can see the calipers flexing a fair bit / ill let you know cheers stormpatrol :D
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

slidin

Post by stormpatrol »

no the slides are a sliding, me thinks ill have to get bank loan and get pro help before the brakes let go big time regards stormpatrol :bad-words: :armsup:
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 179
Joined: Wed Jul 28, 2004 5:17 pm
Location: earth

fix it

Post by stormpatrol »

New rotors pads etc told by pro brake company this will fix the cheesy feel seems the mud stuffs up the pads and rotors who would of thought of this lol lol :armsup: :armsup: :P :bad-words: not so bad got 4 new rotors 4 sets pads and two sets caliper kits for $500.00 , will put them in on sat thanx for all your input cheers stormpatrol
THE SMOKER YOU DRINK THE DANCER YOU GET
Top
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

you say they felt like cheese....

Swiss or Old english?
Top
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

you say they felt like cheese....

Swiss or Old english?
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 131 guests