F20 pix :)

Post by **Chris F20 maniac** » Tue Aug 02, 2005 7:47 am

yeah yeah.

i did all the wiring last night and the bar is all painted up and ready to bolt on all i have to do now is get some bolts! and put in the LED's!

Post by **TX4000** » Wed Aug 03, 2005 9:54 pm

Overhead console revamp time, now with MP3 player !!

swag'o switches and a compartment for all the crap ya always forget.. like matches... bandaids ! etc..

Post by **RobF300** » Thu Aug 04, 2005 5:40 am

Wow in the f20?
Post some pics once you got that in the car looks great!

Post by **Area54** » Thu Aug 04, 2005 12:22 pm

TX4000 wrote:Overhead console revamp time, now with MP3 player !! swag'o switches and a compartment for all the crap ya always forget.. like matches... bandaids ! etc..

Looks good, sure it's not a bit too low?

Watch out what you put up there, it does get very hot in these compartments.

Post by **TX4000** » Thu Aug 04, 2005 5:15 pm

"Watch out what you put up there, it does get very hot in these compartments"

I live in Tasmania ! heheheh point taken tho, there is heaps of room due to the square design of the window/roof, I have had this one in place for years, just needed to clean it up and make better use of it.

Before shot

-> http://home.iprimus.com.au/darrenrabe/f20/IMG_2219.JPG

Post by **BIg StEvE** » Thu Aug 04, 2005 5:30 pm

TX4000 wrote:
"Watch out what you put up there, it does get very hot in these compartments"
I live in Tasmania ! heheheh point taken tho, there is heaps of room due to the square design of the window/roof, I have had this one in place for years, just needed to clean it up and make better use of it.

Before shot -> http://home.iprimus.com.au/darrenrabe/f20/IMG_2219.JPG

Well done TX4000 looks hella

Any chance you can post some pics of the mounts so i can see how strong she will be!

Post by **elgordomuygrande** » Thu Aug 04, 2005 6:26 pm

Better off with a non-cd mp3 player with it skipping every 10 seconds due to the magnificent ride

Nah good work man, looks tight. About time I'm gonna fab myself an overhead console.

Cheers

Post by **TX4000** » Thu Aug 04, 2005 6:34 pm

Well, the thing with an MP3 player is its multi spin ie: the disk spins and reads at higher speed than a normal audio cd, data is read off at a higher transfer (a tad higher requirement than normal audio cd) but buffered at a better rate than normal, even although cd in general is a bad choice for 4wd the Sony previously fitted was fine, combined with the fact I scored the new one off Ebay for $40 bux( as faulty) (did i mention I'm a tech !!

I might make a rough template if anyones interested ? very simple to make and fit well. I will snap some more pix when I get it back in.

Post by **elgordomuygrande** » Thu Aug 04, 2005 8:38 pm

Pics from Chris's new rear bar. neat job!

Post by **TX4000** » Thu Aug 04, 2005 9:23 pm

BIg StEvE wrote:
Well done TX4000 looks hella Any chance you can post some pics of the mounts so i can see how strong she will be!

No probs, its been up for the last 7 or so years... just a bit dull and useless apart from holding the UHF and the cd player, I have some 45 x 45 alum angle on each side of the door frame, and a mount either side of the mirror, its held up well so far. it also has 2 speakers eitherside of the player pointed downwards. The sunvisors close up against it neatly. Will put some pix up on my site.

Post by **TX4000** » Thu Aug 04, 2005 9:46 pm

Oh hey, I bought me an early birthday pressie today -> http://www.narva.com.au/ForwardLighting_27.html

72316's wont be much room left on the bull bar... !

Post by **BIg StEvE** » Thu Aug 04, 2005 9:46 pm

Those pics of your rear bar dont do it justice Christoph!

Looks heaps better in person!

Post by **Chris F20 maniac** » Thu Aug 04, 2005 9:48 pm

thanks to elgordomuygrande for posting up those pics for me mate

wicked man! im looking to do an overhead console soon 2! i look forward to seeing what you have come up with

sorry about the night time pics of the rear bar guys ill take some in the daylight before i get it all dirty

Post by **BIg StEvE** » Thu Aug 04, 2005 9:53 pm

TX4000 wrote:Oh hey, I bought me an early birthday pressie today -> http://www.narva.com.au/ForwardLighting_27.html

72316's wont be much room left on the bull bar... !

HAPPY BIRTHDAY to you! Nice pressie!

Post by **TX4000** » Thu Aug 04, 2005 10:34 pm

Yeah would be :( just measured the middle section of B/bar... 437mm... outer dia of lights...... 220mm ea.... DOHH.... still will make em fit somehow.... grinder time

might bend up a TJM style bar soon.. if I go a 2in lift the existing bar would be in beam of original lights..

Post by **Toyhatsu** » Fri Aug 05, 2005 10:55 am

After looking at all the F20 pics I think that I would rather have one of those than the Feroza (US Rocky). We never got anything from Daihatsu except the Charade and the Feroza for only about 2 1/2 years. What a shame!

What is the wheel base of the F20? Does anybody have any piccies of the F10, F50 & 60's for your poor deprived mates in the US?

Thank you for posting the F20...I like it!

Post by **elgordomuygrande** » Fri Aug 05, 2005 4:52 pm

Hey Kent, too bad you guys haven't had the old daihatsus in the states. Wheelbase is a tad under 80" and track 1200 mm just about the size of a cj3b. Samurais have about the same wheelbase but have a wider track. The f20's feel spacier though due to the boxy design, and it also is about 300 kgs heavier.

F20's F50's and F60's are pretty much the same cars except for the engines.
The F25, F55 and F65 are the pick up versions with a 106" wheelbase. They have other frames and axles (20 mm wider). parts are even harder to find that the swb F20's

Post by **elgordomuygrande** » Fri Aug 05, 2005 5:00 pm

And the pickup.. and my rig next to my brothers samurai and my dad's heep.

Post by **Chris F20 maniac** » Fri Aug 05, 2005 7:54 pm

nice pics of the daihatsu's! i had no idea they came in nice colurs!

it would be good to get my hands on one of those pickups to build up for a comp rig cause the wheelbase on the F20 is just too short for that kind of stuff.

what is the wheelbase length of the SCAT modles?

Post by **SimplyPV** » Sat Aug 06, 2005 3:35 am

ah a scat.... i desperately want one of those!

Post by **BIg StEvE** » Sat Aug 06, 2005 4:25 pm

SimplyPV wrote:ah a scat.... i desperately want one of those!

Should check out the scat that was in Outback challenge! PIGLET i believe. A very sweet rig!(for a Daihatsu)

Post by **elgordomuygrande** » Sun Aug 07, 2005 6:34 am

We didn't have the Scat over here, ss it just a pickup or probably a mysterious missing link

Post by **BIg StEvE** » Sun Aug 07, 2005 9:32 am

This thread should almost become a bloody sticky! Some decent info available in it!

Post by **Area54** » Mon Aug 08, 2005 12:33 pm

Here are some pics of the interior of mine, different cupboards and compartments.

I've lined the roof in black marine carpet, the grade without the backing to enable me to conform the carpet to the roof shape. Used contact adhesive for the best results.

Shown is the cargo area with slide out drawer, side wheelarch cupboards, rear side overhead cupboards, top shelf between rear side overheads, front windscreen overhead cupboard, and centre overhead storage between the seats.

Post by **Area54** » Mon Aug 08, 2005 12:40 pm

Post by **Area54** » Mon Aug 08, 2005 12:48 pm

Custom guage cluster, I have a delux dash board to mount up, but I have to shape it to match the contour of the guage cluster.

Couldn't get any pics of the windscreen overhead compartment (just too much background glare), but you can imagine what it looks like, judging from the other pics.

I still have to install the rear door panels, ply and black carpet overlay.

Post by **elgordomuygrande** » Mon Aug 08, 2005 4:16 pm

WOW, that thing has more storage space than an airliner

Did you move the handbrake lever or did you build the centerconsole around it?

Nice touch, the spare fender flare in the cupboard. Always good to hav one. Mine are crumbling to pieces

Cheers

Post by **Area54** » Mon Aug 08, 2005 4:56 pm

I built the console around the lever, 2 compartments - 1 in the front open top, the other under the lid with lift out tray.

Post by **BIg StEvE** » Mon Aug 08, 2005 4:57 pm

Dang Area Fitty Four! Thats hella cool! Chris get your arse into gear you got some building to do!

Post by **TX4000** » Mon Aug 08, 2005 8:57 pm

Area54 wrote:Custom guage cluster, I have a delux dash board to mount up, but I have to shape it to match the contour of the guage cluster.

Couldn't get any pics of the windscreen overhead compartment (just too much background glare), but you can imagine what it looks like, judging from the other pics.

I still have to install the rear door panels, ply and black carpet overlay.

Did you notice much noise deadening with the roof "carpet" ? mine drums lots.

Outer Limits 4x4 Board

F20 pix :)

Who is online