Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help with gu

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

Contact:
Contact roverrat

help with gu

Post by roverrat »

Was brosing the trading post and saw EFS 4" complete kit with shocks panhards and casters for $800 what is this kit like??

Second will a 100 series drawer system fit in a GU?
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Top
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

Ive got an EFS 5" lift kit, had it for around 1.5 years and never had a problem with it....it goes good and I would quite happily get EFS gear again
Top
4by
Posts: 122
Joined: Mon Mar 31, 2003 9:30 am
Location: Victoria

Post by 4by »

roverrat, the drawers should fit in okay, but you will have to cut the top as it is narrower in the rear than the 100. Measure the length of the drawers from the rear of the back seat to the back doors first to make sure.
The width of the top shelf will be narrower.

Did mine the same. Measure, pull back the carpet, cut, then fold the carper over the edge and glue. Very easy.
Cheers.......4by.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests