Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4WD Light

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 165
Joined: Wed Jun 08, 2005 7:25 pm
Location: Gympie, QLD

4WD Light

Post by whoneedsbitumen »

The little green light that comes on when u engage 4WD isnt working.. i have replaced the globe ( which was blown) and its still not working i couldnt see any wired loose or anythign liek that just wondering if this is a common thing in a HJ60 and if so whats the fix?

oh yeah its HJ60 sahara with the push buttong H4 below the green light left side of steering wheel ....
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Re: 4WD Light

Post by joel HJ60 »

whoneedsbitumen wrote:The little green light that comes on when u engage 4WD isnt working.. i have replaced the globe ( which was blown) and its still not working i couldnt see any wired loose or anythign liek that just wondering if this is a common thing in a HJ60 and if so whats the fix?

oh yeah its HJ60 sahara with the push buttong H4 below the green light left side of steering wheel ....
Same setup as mine mate. On mine put with the tranny lever in H2, press the H4 button and the light comes on. Move the tranny lever to N and it goes out. Turn the H4 button off. Then move the tranny lever to L4 then press the H4 button again and the light should come on. Dunno if this is gonna help but meh... if not look at fuses etc... when the light is out do you still get high and low range 4x4 at the wheels?? joel
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 165
Joined: Wed Jun 08, 2005 7:25 pm
Location: Gympie, QLD

Post by whoneedsbitumen »

yeah mate the transfer is working fine but the light doesnt iluminate at all
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests