Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Transfer the Gears??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Transfer the Gears??

Post by NUGGS »

After phoning wreckers throught out Australia I have been unable to source a 1l tcase with the larger splines :cry:

So I have decided to splash out and buy sum gears :D

But before I do would like some friendly advice!!

My vehicle is an 89 1.3 zuk running 31x10.5. Will never be running bigger tyres and not really after a rock crawler, just want high way speeds back and reduce clutch burning offroad.

Would I be better of going tcase gears or ring and pinion. If tcase, 4.16's or 5.14's - probably calmini's.

Has anyone ever purchased the full rebiult tcases from the likes of Rocky Road or Roadless Gear?? Would it be possible to have something like that sent from the states?? (prices reasonable)

Has anyone ever ordered anything direct from calmini?? I enquired a while back and was kindly asked to speak to my local stockist but I don't really want to as their service is pathetic!(and the mark up is :shock: )

Sorry for the bararge of ???

Appreciate any input.

Kev.
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

i worked this out in a previous thread... stock tyre is 26".. a 31" tyre is 19.2% larger than stock. Calmini 5.14 high range is 18.3% reduction. this puts you somewhere around the area of a zuk running 215/75r15s. a good rev range in my opinion as stock tyres make the engine REALLY rev!

i asked calmini also, but they directed me to "my local dealer" which i already knew was 4wd USA in bayswater.

The mark-up was considerable, but the service was pretty good - i got weekly updates on the gears whereabouts and he even waited around till 5.45pm for me to get there to pick them up.

the other advantage is if the gears fail i can take them to 4wdUSA to send them to calmini for warranty and not have to deal with it myself. a big plus.
The worst thing about censorship is ███████.
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

alien wrote:the other advantage is if the gears fail i can take them to 4wdUSA to send them to calmini for warranty and not have to deal with it myself. a big plus.


hhhmmm very true!!

How long did 4WD Usa take to get them in??
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

4 weeks... that includes 2 weeks delay on the order too...

however he did say he was ordering more than just mine to keep in stock - so he may have some sitting there waiting for you!
The worst thing about censorship is ███████.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Bought my 5.14s from Eddie at 4wdusa cost was $1050 good value kit is very good easy to install with lots of photos and write ups for the install.Just dont be put of by Eddie who comes across as a bit of a WANKER he had gears on the shelf
Top
Posts: 67
Joined: Tue Jun 22, 2004 8:12 pm
Location: Where ever I want to be

Post by cazook »

Change your diff ratios alot cheaper
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Dancan he gave me a quote of $1180 last week. so they have gone up.

Their is one set in stock, but with any luck I will have them. I have the cash just not the time to go get them.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

$1180??? he upped it $100 in a month? lol

i got mine for $1080. tell him to do it cheaper for you =P
The worst thing about censorship is ███████.
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

alien wrote:$1180??? he upped it $100 in a month? lol

i got mine for $1080. tell him to do it cheaper for you =P


Thats if he is actually telling the truth and he has some in stock.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

hmm well when i ordered mine he said he was ordering a few cos theres been alot of calls about them.... i wouldnt be suprised if he ordered at least one more with mine.
The worst thing about censorship is ███████.
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

if ya no him he will give ya a good price, so guess what dewse :finger:
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

cazook wrote:Change your diff ratios alot cheaper


Are diff ratios going to accomplish what I am after???

From the little research I have done diff ratios don't seem to be all that much cheaper. Spoke to someone about vit centres and they quoted almost $1000 just to supply second hand????? Calmini wouldnt be far off that either by the time I get them here :cry:
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

bazooked wrote:if ya no him he will give ya a good price, so guess what dewse :finger:


I'm sure he will remember shane, who will be with me when I go in :finger:

Not every day someone orders 39.5 iroks :D
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

Just spoke to Eddie still got 1 set in stock :D

But you guys are right, unless you know him....$1180 :cry:

Maybe he will give discount if I use Duncans rather colourful reference...........................







:armsup:
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Dont mention my name to him as i cost him dollars by building stuff for mates for nothing that he sells he hates me for that.Alien was right they were $1080 hes just trying to make more money probably from the same order.
Top
Posts: 82
Joined: Mon Dec 20, 2004 4:18 pm
Location: Perth WA

Post by NUGGS »

duncan wrote:Bought my 5.14s from Eddie at 4wdusa cost was $1050 good value kit is very good easy to install with lots of photos and write ups for the install.Just dont be put of by Eddie who comes across as a bit of a WANKER he had gears on the shelf


This is the colourful reference I had in mind :D

You guys are obviously close friends :lol:
'89' Sierra Softy, 31x10.5M/T's, 2" susp, 2" BL, shackles, extractors.
Top
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

NUGGS wrote:
cazook wrote:Change your diff ratios alot cheaper


Are diff ratios going to accomplish what I am after???

From the little research I have done diff ratios don't seem to be all that much cheaper. Spoke to someone about vit centres and they quoted almost $1000 just to supply second hand????? Calmini wouldnt be far off that either by the time I get them here :cry:


at that price go the transfer gears , both myself and a mate bought sets from overkill (ring and pinions5.12) cost from memory $380 per set , must be a top set for $1000 must come complete with centres axles and tyres :finger:
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 10 guests