Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series hilux

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 354
Joined: Tue May 27, 2003 7:50 pm
Location: sutherland

60 series hilux

Post by dreama »

the idea is no more
Last edited by dreama on Fri May 30, 2003 9:54 pm, edited 1 time in total.
Posts: 34
Joined: Fri Nov 08, 2002 11:42 am
Location: South Aus.

Post by Paul »

Dreama,

I'm no Yota expert, but I believe that you will need to move the spring perches to the top of the Cruiser axle (so it's not just a bolt in and go sort of thing (Thus rotating the housing to suit lift is not a huge issue)) and from memory??? the Cruiser axle is about 3" wider than the Lux. (1410mm vs 1486mm????)

Paul.
[size=100][color=yellow][b]
It's not what you buy, it's what you build.

[/b][/color][/size]
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

dont for get that a hilux has the pumkin in the center where as the 60series diff is offset to the drivers side
you might have some drive shaft issues there
www.overkill4x4.com
ph 94766137
Posts: 354
Joined: Tue May 27, 2003 7:50 pm
Location: sutherland

Post by dreama »

thanx for the input i have thought about the diffs needing to be sprung over it was just a matter of what height i want it to sit at i have been coming up with more issues every day there is still lots to think about before i go wasting money and have been advised to just run with the hilux gear but like the name says i will always be dreaming up little ideas like this
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

Why would you want 60 series diffs and axles? The fronts were scrapped for the 80 and they returned to using hilux diffs. They may be slightly stronger, but you would be better to go for a set of longfields and spacers!

I have seen a few hiluxs with 80 series rears but have not looked closly at them?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests