Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ diff ratios

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

GQ diff ratios

Post by lwbmav »

Hey guys anyone know what diff ratios GQ's have 4.2 petrol 3.0 petrol and 4.2 diesel..

Thanks Scott
I'am not stuck it's just slippery
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

both 4.2 diesel and petrols had the 4.11 ratios and the 3 litre petrols had the 4.3s
Top
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

Post by lwbmav »

GQ wrote:both 4.2 diesel and petrols had the 4.11 ratios and the 3 litre petrols had the 4.3s
Thanks mate so there's no factory 4.6's
I'am not stuck it's just slippery
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

lwbmav wrote:
GQ wrote:both 4.2 diesel and petrols had the 4.11 ratios and the 3 litre petrols had the 4.3s
Thanks mate so there's no factory 4.6's
yes there are

they are in the 2.8 TD GQ's
Top
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

Post by lwbmav »

GQ wrote:
lwbmav wrote:
GQ wrote:both 4.2 diesel and petrols had the 4.11 ratios and the 3 litre petrols had the 4.3s
Thanks mate so there's no factory 4.6's
yes there are

they are in the 2.8 TD GQ's
Nice
they worth much
I'am not stuck it's just slippery
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

lwbmav wrote:
GQ wrote:
lwbmav wrote:
GQ wrote:both 4.2 diesel and petrols had the 4.11 ratios and the 3 litre petrols had the 4.3s
Thanks mate so there's no factory 4.6's
yes there are

they are in the 2.8 TD GQ's
Nice
they worth much
varies between 500 to 1000 per end 2nd hand.. geniune...

u can get any gear up to 4.88 aftermarket
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

4.6s under a grand per end genuine...

used they are very sort after so they get the bucks.

aftermarket ones have a reputation of not lasting for ever, but if its only offroad, then go genuine rear (its always used), and aftermarket front (not used as much) and you will be laughin
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Who sells the aftermarket ones in Australia.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

..

Post by JemmyBubbles »

Like a thousand frickin people gosh !!! (Napoleon Dynamite)...

I was under the impression that all of the stuff you get from snake,bbm etc was all aftermarket gear. Brand new genuine is $$$$$$ but the top Shiz.

There were quite a few 2.8td around... just takes a bit of searching. I know there is a wrecked 3 lt in Beresfield newcastle with 4.3's even rarer still : )

Agree Genuine Back aftermarket front... What I will do..

Jeremy
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

Re: ..

Post by lwbmav »

JemmyBubbles wrote:Like a thousand frickin people gosh !!! (Napoleon Dynamite)...

I was under the impression that all of the stuff you get from snake,bbm etc was all aftermarket gear. Brand new genuine is $$$$$$ but the top Shiz.

There were quite a few 2.8td around... just takes a bit of searching. I know there is a wrecked 3 lt in Beresfield newcastle with 4.3's even rarer still : )

Agree Genuine Back aftermarket front... What I will do..

Jeremy
Ok so how much are 4.3's worth then, me got some of those :)
I'am not stuck it's just slippery
Top
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

have had 4.625s from G&J gears running in my GQ for 4 years
Jeep Wrangler TJ

Jeep Cherokee XJ
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ..

Post by bogged »

lwbmav wrote:Ok so how much are 4.3's worth then, me got some of those :)
about $20 cheaper than 4.6
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

Give me your 4.3's :D ... and I will trade you my 4.1's for no extra cost..

Nah if you wanna get rid of them give me a PM..

Jeremy..
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Posts: 655
Joined: Fri Nov 22, 2002 8:00 am
Location: Cranbourne, Victoria

Re: ..

Post by bundyrum4x4 »

bogged wrote:
lwbmav wrote:Ok so how much are 4.3's worth then, me got some of those :)
about $20 cheaper than 4.6
:rofl:

This is not what you said when you wanted a set :lol:


:rofl:
89 Maverick LWB ute, Turbo Deisel, 6hp High Mount, 36" Peeds, lockers etc

GU 4.5, 35's etc
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ..

Post by bogged »

bundyrum4x4 wrote:This is not what you said when you wanted a set :lol:
Sorry $70 an end. it was in the cupholder thread thats why I could never find the fuckin thing.


Genuine Nissan ones.
4.6 $990per end..
4.3 $925 per end..
Top
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

Re: ..

Post by lwbmav »

bogged wrote:
bundyrum4x4 wrote:This is not what you said when you wanted a set :lol:
Sorry $70 an end. it was in the cupholder thread thats why I could never find the ***** thing.


Genuine Nissan ones.
4.6 $990per end..
4.3 $925 per end..

WOW so what do people pay secondhand I have some in a car I am trying to sell so it maybe worth taking them out.

cheers Scott
I'am not stuck it's just slippery
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ..

Post by bogged »

lwbmav wrote:WOW so what do people pay secondhand I have some in a car I am trying to sell so it maybe worth taking them out.

cheers Scott
what ratio are you trying to sell? Are they complete centers? Lockers? LSD?
Top
Posts: 85
Joined: Thu May 20, 2004 8:11 pm
Location: hobart TAS

Re: ..

Post by lwbmav »

bogged wrote:
lwbmav wrote:WOW so what do people pay secondhand I have some in a car I am trying to sell so it maybe worth taking them out.

cheers Scott
what ratio are you trying to sell? Are they complete centers? Lockers? LSD?
I am in TAS so postage would be a problem for complete diff's so I guess it would be crownwheel & pinion's 4.3's
I just want to know what they are worth ie should I take them out before I sell the car because I still have the old diff's handy.
I'am not stuck it's just slippery
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: ..

Post by bogged »

lwbmav wrote:... so I guess it would be crownwheel & pinion's 4.3's
I just want to know what they are worth ie should I take them out before I sell the car because I still have the old diff's handy.
they are worth what the buyer is willing to pay ...
I paid $700 for a pr complete with centers while back, then second set was a bit more, but werent as fucked as the first ones.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests