Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what to pay 2 install lockright, front hilux?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

what to pay 2 install lockright, front hilux?

Post by BadLux »

Hey as subject says what should I be looking at to have a lockright installed in the front of a hilux? I've been quoted $500 including replacing the ball joint seals..
Top
Posts: 97
Joined: Tue Sep 23, 2003 6:58 pm
Location: canberra

Contact:
Contact tukadafoonday

Post by tukadafoonday »

that sounds pretty good i think to be installed to? from the U.S you can get lockrites from about $400Aus

so $500 installed sounds pretty fair i would think?

Andrew
Fj40 '84, 2F. PWS, 2" extended shackles, detroit rear, soon lockrite front. huge 31" tires :( one day some big mothers!
Top
Posts: 126
Joined: Wed Mar 31, 2004 9:55 am
Location: Toowoomba

Post by wannaberacer »

I think you mean $500 to install it only...separate from the price of the locker....right?
Top
Posts: 123
Joined: Tue May 25, 2004 11:09 am
Location: perth

Post by bear »

hey guys.
i bought a lockrite from USA 4 $375 aus. if you pulled down the diff and remove the centre yourself i know its only bout $125 to install the lockrite in. the seals are only $3.00 each. my 2 cents worth.
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

It's not a difficult job installing a lockrite as it only replaces the spider gears. However if you're not mechanically minded $500 sounds OK if they are going to rebuild the swivel hubs at the same time.

The lock rite install and swivel hub rebuild would take a little over half a day in labour + parts.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 445
Joined: Sun Oct 31, 2004 9:23 am
Location: Perth

Post by BadLux »

yeh i've already got the lokka, see im very interested in trying to do it myself, just sounds a bit complicated n I don't wanna F%$K it up! I can install the actuall lokka to the 3rd member, as I pulled it outta a 80 series high pinion 3rd member as it came in it.. I did the IFS rear leaf swap on my truck in bout 45mins and found it easy as pie once I'd found out what to do etc.. just feel I might be getting a bit in over my head if I try fit this lokka, but as ppl say you gotta learn sumwhere...
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

mate i took a spare centre and lockritei n a box to a diff shop.
the backlash and stuff seems nice not savage at all but it is brand new??
$110 or $100 i paid for install into centre.

thats what i would do if i were you.

or it was $240 drive in drive out.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 34
Joined: Sat Aug 09, 2003 7:37 pm
Location: Riverland SA

Locka

Post by Benszook »

I work at 4WD systems in SA where they manufacture their own locka they charge max $350 to install that is removing and refitting the centre and its not going to take much more to do the seals so $500 might be a bit rich.

Its not hard if you follow all the instructions properly and just make sure all your clearances are within spec.

Cheers
Ben
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 1 guest