To give you an idea of what I am talking about they can be found here;
www.rovertym.com/radiusarms.htm
I am considering making a similar item but will not involve cranking of a standard arm it will be a complete cast high tensile biz-alloy construction (on peice, no welds)
I have looked into the option of having them made slightly longer (14-16mm) and also have to reasearch on the different thickness of radius arms as they changed as years went buy.
My main aim is to get sum good quality radius arms at a good affordable price. Now i dont know wat you would class as affordable, so thats why I am asking wat YOUR opinions are and wat YOU would like to pay (if you are even interested at all)
This is all to decide weather its worth me putting my time and sum $$$ down to make these available to you.
They will all be the same (except diff end bush width) to suit 3-4" spring lifts. They will over correct castor on a 2" lift.
People that have seen the difference these have made to my lifted vehicle alone, I am sure will recomend them. I just dont know wat sorta value these things are worth so hopefully this can get a ball rolling
![Very Happy :D](./images/smilies/icon_mrgreen.gif)
Cheers
Anthony