Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ 40 Gearbox Bash Plates

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

FJ 40 Gearbox Bash Plates

Post by matt.mcinnes »

OK here is a question for all you sad 40 series lovers.
I have fitted a 5 speed in to my FJ40 which means, for those of you who know, the gear box is now around 90mm longer.
So the old bash plate no longer protects all of the transfer case.
Late Model FJ's came with a five speed I belive. If so does any one know which years and models and if they had a longer bash plate as standerd?
I know i can cut and weld the original extending it to match but would prefer a full sprung steel original if i can get one, if they exist. Maybe even a modified 60 serise on a early 2f and 5 speed.
Matt
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Posts: 97
Joined: Tue Sep 23, 2003 6:58 pm
Location: canberra

Contact:
Contact tukadafoonday

Post by tukadafoonday »

just had a look on my '84 40 and i dont have a bash plate just the cross member? here are some pics if you like.

not very good shots but hopefully these might help?

Andrew
You do not have the required permissions to view the files attached to this post.
Fj40 '84, 2F. PWS, 2" extended shackles, detroit rear, soon lockrite front. huge 31" tires :( one day some big mothers!
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

Hey matt,

If you want I can take a few photos of my bash plate if you need.. i know it extends from the gb crossmember to just past the start of the tailshaft (theres a bit cutout for it)...

cheers..
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Look in 1983-1984 SWB.

Dave
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

from my 84 bj42..

Image
Image
Image
Image
Image
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

Thanks for all the help Guys.
Cant find a late modle bash plate, so went for a 60 series one. Lengths fine but a little wide.
Angle grinder and welder at the ready. :armsup:
http://www.fj40-2f-eti-locked-n-loaded.com

Advanced (HB) Intercoolers
http://advancedhbintercoolers.com
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest