Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Timing Mark TDC

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Timing Mark TDC

Post by Kickingback99 »

Can anyone tell me exactly what the the timing mark for tdc looks like. Installing distributor and I do not seen any mark on crank pulley? I do see 2 small holes spaced slightly apart on side of crank pulley. Any help or pictures greatly appreciated. I am new to setting ignition timing and I am not quite sure what to see aligned to marker from cover. Have looked at manual but need further information. Thanks....
:?:
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Try looking with a timing light when the engine is idling (with the vac advance disconnected). You should see a mark on the harmonic balancer spot in the middle of the timing indicator on the block (if the timing is on 3 degrees BTDC as per factory specs.) Make sure the idle is stable at 800 -850 RPM too or the advance weights inside the distributor will affect the timing; also turn off all electrical loads and do it when the engine is warm.
David
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

Well, that's the problem. When i took the distributor out, I turned the rotor button by accident and have no idea where it should be at to reinsert distributor so that i 've got it right. If I put the distributor in and attempt starting will it harm the engine? I have never had to mess with timing/ignition issues before and I am unfamiliar with this. Not afraid to learn though. Unfortunately I usually about things after screwing them up and having to correct it. Any advice?
Top
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

bro, ur dizzy can only fit in one way... so its gonna take you a while to get that notch to line up perfically.... but its doable...

nearly took me 2 hrs on my first attempt... :lol:

if you didnt change the timing between ur cam and ur crank, then your fine. jus slide the dizzy in and keep repositioning that notch until it finally goes in all the way. then you should be set.

if you DID change the timing between the cam and the crank, then thats a different issue to deal wth, not related to the dizzy.

any more questions? feel free to ask!
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Top
Posts: 81
Joined: Thu Jul 21, 2005 7:37 am
Location: Tennessee - USA

Post by Kickingback99 »

THanks, will try. Did not change timing between cam and crank thankfully. Thanks for the reply!
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Yes, distributor will only go in one way. If you check the drive on the bottom of it one lug is wider than the other.
David
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest