Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
exhaust for turbo middy
Moderators: toaddog, TWISTY, V8Patrol, Moderators
exhaust for turbo middy
i went to an exhaust shop and was told from turbo to back off truck $1400 2.5 inch mandrel i think that is to much does anybody have any thoughts i was tolled by motsons that i would need to be that before i go turbo upgrade.
LETS GO BRONCOS
Steep.
Just get 2.5 inch press bent - the mandrel bends won't make that much difference on what i presume is a diesel - only hi revving motors really need em.... for $1400 you are better off with press bent 3 inch if worried - extra diameter might compensate for press bends - not sure. My exhaust shop charges $150 for 2.5 inch press bent straight thru from turbo back on shorty patrol.....
Money saved would pay for part the turbo kit - most kits come with exhaust already.... unfortunately I am presuming its a diesel of course....
Hope it helps.
Money saved would pay for part the turbo kit - most kits come with exhaust already.... unfortunately I am presuming its a diesel of course....
Hope it helps.
MQ/MK Parts for sale!!!! See for sale section!
Re: exhaust for turbo middy
oi mate, try these people. had a few dealings with them through the few cars i have had over time. good, friendly, reliable and pretty close to you.frp88 wrote:i went to an exhaust shop and was told from turbo to back off truck $1400 2.5 inch mandrel i think that is to much does anybody have any thoughts i was tolled by motsons that i would need to be that before i go turbo upgrade.
Muffler Pro Centenary
615 Seventeen Mile Rocks Rd Seventeen Mile Rocks QLD 4073
ph: (07) 3715 5755 Mufflers &/or Exhaust Systems
indubitably
Re: Steep.
what place would this be i need a good place to put a zorst on my hiluxPatroldude wrote:Just get 2.5 inch press bent - the mandrel bends won't make that much difference on what i presume is a diesel - only hi revving motors really need em.... for $1400 you are better off with press bent 3 inch if worried - extra diameter might compensate for press bends - not sure. My exhaust shop charges $150 for 2.5 inch press bent straight thru from turbo back on shorty patrol.....
Money saved would pay for part the turbo kit - most kits come with exhaust already.... unfortunately I am presuming its a diesel of course....
Hope it helps.
www.overkill4x4.com
ph 94766137
ph 94766137
Same, 3 inch mandrel bent for similar price.mickbeny wrote:Hi all...I got a 3" system put on a cruiser for $550.00.
Get your turbo done then your exhaust, otherwise you have to get your exhaust done by a shop and then modified to suit your turbo setup. More expensive than just modifying exhaust after turbo enough to drive it to exhaust shop and get it done once.
Just my experience
thanks for the feedback yes its an oiler here comes the good part it allready has the turbo factory that is why i thought $1400 was ludacris(sorry chris)i thought 350-450.I dont want to go 3" because i dont have a body lift and it might be a bit tight i'll try the shop that de lux recommended see what they say.
LETS GO BRONCOS
Mate give Brian at Beaudesert Exhaust a call cause he sponsors Shane (Big Red) and I got a 3" dump pipe and 3" mandrel bent system for my GQ wagon for $750 straight of the shelf all I had to do was fit it.
Cheers
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Linc
[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Vaughan at Muffler Pro Centenary (the bloke de lux said)or Gary at Muffler Pro in Ipswich (on the one mile rd) would be two of the best places around ..I deal with them all the time for my own stuff and they do quality work at a great price..
pm if you need more details for them
cheers dave
pm if you need more details for them
cheers dave
www.bolsys.com.au
the original and the best
the original and the best
Re: Steep.
lies lies liesPatroldude wrote:Just get 2.5 inch press bent - the mandrel bends won't make that much difference on what i presume is a diesel - only hi revving motors really need em.... for $1400 you are better off with press bent 3 inch if worried - extra diameter might compensate for press bends - not sure. My exhaust shop charges $150 for 2.5 inch press bent straight thru from turbo back on shorty patrol.....
Money saved would pay for part the turbo kit - most kits come with exhaust already.... unfortunately I am presuming its a diesel of course....
Hope it helps.
if you are upgrading your turbo definately go for a 3" mandrel bent, after all your doing it to make more power and a proper 3" is going to flow alot better then a pressbent - cause at the end of the day whats the point of a 3" tube with closed in bends ??
the dump pipe, or pipe directly off the turbine on the turbo is the one pipe that will make the biggest difference to boost response, overall boost (depending on factory boost control) and power
dont pussy foot around and do things half arsed. 3" mandrel bent from the turbo back or dont bother wasting your money
and yes, swap turbo first as if you dont (depending on make of turbo) you will have to make an adaptor or refab a whole new dump - more coin
hope this helps
[b][url=http://www.perth4x4.net/forums/]p e r t h 4 x 4 . n e t[/url][/b]
Who is online
Users browsing this forum: No registered users and 0 guests