Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pics of Hilux exhaust ?

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

pics of Hilux exhaust ?

Post by soo33y »

Hey,

I'm after some pics of your Hilux exhausts. LN106 model. I have just had mine done and it's Sh!$%# !! to say the least. I got a 2.5 inch mandrel and it is sitting below the chassis rails where is crosses under the front driveshaft....

Would appreciate some pics of your rigs out there....So I can get mine rectified....

CHeers,
Daniel
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

dont cross under the front drive shaft, u run it right along under the cab and then go across to the other side just under the rear driveshaft
www.overkill4x4.com
ph 94766137
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

mine done same

Post by LuxyBoy »

That's how mine was done spazbot. Just make sure they leave you enough room to get at your transfer case filler plug and your suspension bolts; never know when you will need to.
Kind Regards,
Brad
Top
Posts: 795
Joined: Mon Nov 04, 2002 10:15 pm
Location: Sydney NSW

Contact:
Contact taziiy

Post by taziiy »

Image

Image

Image

Image

here is some of the one i just had done on my 4y hilux its 2 1/4
95 hilux d/c locked & lifted, [url=http://downunder4x4.net/forum/index.php?referrerid=18]Downunder4x4[/url]
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

The IFS ones cross under the front driveshaft and is crap very easy to get hung up on and dent.
Much better as said to cross over after transfer case.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 19
Joined: Tue Aug 16, 2005 7:19 pm
Location: brisbane bay side

Post by geff »

hay dude i have a 89 tray back single cab i found 2.5 was to big not anough back pressure but got them to run it about 2inc form the tray flore no way im getting cought up there just watch the spair it will burn if it is to close
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 0 guests