Was wondering if anyone can help. Am in the process of changinging the timing belt on a Rocky (Australian) 2.8L Diesel and having never done it before have a few questions.
It looks as though I have to take the pulley off the crankshaft in order to remove the timing case cover, This appear to be held on with a 24mm bolt, but before I start forcing anything does anyone know
a) if this is correct
b) In order to take the bolt out how do I hold the crank stationary - I have made up a tool that I can screw on in place of the fan belt pulley. Is this OK
c) the bolt into the crank, is this a normal thread CCW to remove, or the opposite of normal bolts CW to remove.
d) anything else I should know or look out for,
Just bought the beast 489K on the clock and apparantly never had the timing belt replaced. - wish me luck
Rick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
[b]Timing Belt for 2.8 DL Diesel Rocky[/b]
Moderator: Tiny
Who is online
Users browsing this forum: No registered users and 12 guests