Ok we have a 2h motor with a blown gearbox and a new 1hzj gearbox without the bell.
Is it just a matter of using the 1hzj clutch kit with the 1hzj gearbox and sourcing a 1hzj bell. Anybody have a 1hjz bell in that case.
1hjz spline is 15mm longer than the 2h.
LudaCris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting a 1hzj 21 spline gear box to a 2h motor.
Moderators: toaddog, Elmo, DUDELUX
Fitting a 1hzj 21 spline gear box to a 2h motor.
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Input shafts shouldn't be interchanged because the geartooth is a different form (shape) and arn't compatable with the cluster gear . The shaft will phyically fit but is noisy in operation so the life is questionable. The early box's are heaps better stronger and more reliable. If you really want to use the box make a spacer between the g/box and bell housing get a 1HZ clutch plate and the 2h pressure plate . The clutch plate's are vertually identicle appart from the spline.
Wally
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Input shafts shouldn't be interchanged because the geartooth is a different form (shape) and arn't compatable with the cluster gear . The shaft will phyically fit but is noisy in operation so the life is questionable. The early box's are heaps better stronger and more reliable. If you really want to use the box make a spacer between the g/box and bell housing get a 1HZ clutch plate and the 2h pressure plate . The clutch plate's are vertually identicle appart from the spline.
Wally
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Input shafts shouldn't be interchanged because the geartooth is a different form (shape) and arn't compatable with the cluster gear . The shaft will phyically fit but is noisy in operation so the life is questionable. The early box's are heaps better stronger and more reliable. If you really want to use the box make a spacer between the g/box and bell housing get a 1HZ clutch plate and the 2h pressure plate . The clutch plate's are vertually identicle appart from the spline.
Wally
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
What he said :-)))80UTE wrote:Input shafts shouldn't be interchanged because the geartooth is a different form (shape) and arn't compatable with the cluster gear . The shaft will phyically fit but is noisy in operation so the life is questionable. The early box's are heaps better stronger and more reliable. If you really want to use the box make a spacer between the g/box and bell housing get a 1HZ clutch plate and the 2h pressure plate . The clutch plate's are vertually identicle appart from the spline.
Wally
The other thing to quantify is...when you say you have a new 1hzj box...r u refering to a r151, or does it look thesame as the old 2h box???
Somewhere along the 75 series line, they went to r series boxes as opposed to h55...might have been the 78/9 series 1hz only.
Whilst the ratios are beter on the r box, they are weak compared to the h55
Andrew
Somewhere along the 75 series line, they went to r series boxes as opposed to h55...might have been the 78/9 series 1hz only.
Whilst the ratios are beter on the r box, they are weak compared to the h55
Andrew
Who is online
Users browsing this forum: No registered users and 3 guests